Hewlett Packard 608B Генератор
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Hewlett Packard 608B ?
If you have any other manuals for the
Hewlett Packard 608B you can upload the files here .
Model:
608B
Date:
Category:
Group:
Description:
VHF Signal Generator
Information
The Hewlett-Packard Model 608C VHF Signal Generator is a
general purpose test instrument which furnishes accurately
adjustable r-f signals from 0.1 microvolt to 1 volt over the
frequency range from 10 to 480 megacycles. The output signal
may be amplitude modulated by internally generated sine
waves or by externally applied sine waves or pulses. The
output signal level is adjustable by an attenuator
calibrated in both volts and dbm and can be read directly to
an accuracy of ±1 db over the full frequency and attenuation
range without the use of external pads, monitoring devices,
or charts. The 608C features a very wide frequency range,
high output, and straightforward operation through the use
of reliable, direct-reading controls and meters.
The Model 608C Signal Generator is designed for general
applications in the 10- to 480-megacycle frequency range,
such as testing, calibrating, and trouble shooting VHF radio
equipment and circuits. In conjunction with other test
equipment, the 608C is useful for measuring standing wave
ratios, antenna and transmission line characteristics,
receiver sensitivity, etc. To obtain best accuracy in these
applications, care has been taken to hold spurious
modulation from the Generator to a very low value.
Manual type:
Руководство по техническому обслуживанию
Pages:
10
Size:
1.09 Mbytes (1147842 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Сканированный документ, читая частично плохо, частично не читается.
Upload date:
30 December 2017
MD5:
ef8d9c8c6179ca99bc7510c1835fba02
Downloads:
2010
Information
Service Notes
This Service Note contains information necessary for
replacing and recalibrating the output attenuator in the
608A/B/C/D/E/F Signal Generators. The procedure is described
for each model, using the appropriate replacement attenuator.
This Service Note outlines the procedure for modifying the
Model 608C.D VHF Signal Generators for regulated DC filament
operation of the RF circuits.
The original multivibrator filament Power supply in Some
cases caused ripple on the output RF signal from the
generator. The DC filament supply prevents this from happening.
Добавить комментарий
Правила пользования порталом
«Правила пользования порталом» содержат правила размещения комментариев на портале Cita Rīga. Добавляя свой комментарий, Вы подтверждаете, что согласны со следующим:
- Хотя модератор и будет пытаться проверить комментарии, невозможно оперативно проверить все добавленные комментарии.
- Все комментарии содержат мнения и суждения соответствующих авторов, но ни в коем случае не администратора или авторов портала Cita Rīga.
- Вы соглашаетесь не размещать в своих комментариях заведомо ложный, незаконный, содержащий угрозы, оскорбительный, порнографический материал, а также разжигающий ненависть или нарушающий частную жизнь других.
- Администратор сохраняет за собой право без предупреждения редактировать, перемещать или удалять любой комментарий, если он не соответствует данным Правилам пользования порталом.
Нарушение данных Правил может привести к лишению возможности добавления комментариев в дальнейшем.
Эти Правила могут измениться в любой момент и без предупреждения.
Комментарии