Drake MN-4 Другой
Производитель:
Изображение 1 из 1
Если у вас есть другие фотографии или руководства для
Drake MN-4, вы можете загрузить файлы в здесь .
Модель:
MN-4
Дата:
Категория:
Группа:
Описание:
Matching Network
Информация
The typical modern Transmitter has a pi-network tank circuit
and will work into resistive loads of 50 to 75 ohms with
Voltage Standing Wave Ratios (VSWR) of 2:1 or less* This
resistive load can only be achieved with a resonant antenna;
thus for multi-band operation multiple antennas are
required. Space and cost considerations render this solution
impractical for most amateurs- The MN-4 impedance-matching
network can:
1. Measure feedline VSWR, then reduce the VSWR at the
Transmitter output to 1:1.
2. Monitor Transmitter power output in watts directly and
continuously.
3. Attenuate 2nd harmonic output from Transmitter by 25 to
35 dB; thus it may eliminate the need for a low-pass TVI filter.
4. Match an Antenna to a Transmitter having fixed loading.
5* Give optimum match with multi-band antennas.
6. Precisely match Transmitter to an Antenna across a
complete amateur band.
7. Permit "off the air" Transmitter tuning and Antenna
matching at low power using dummy load.
8. Stores Antenna loading adjustment for Transmitter when
switching from "barefoot" to linear Amplifier operation3 as
network is by-passed in DIRECT position of bandswitch.
9. Match Transmitter output to linear Amplifier which does
not have 50 ohm input impedance.
10. Help localize trouble by comparing Transmitter output
into Antenna and into dummy load.
Hасто́льная кни́га тип:
Обслуживание и Руководство пользователя
Страницы:
11
Размер:
162.38 Kbytes (166277 Bytes)
Язык:
english
Пересмотр:
Hасто́льная кни́га ID:
Дата:
Качество:
Сканированный документ, читая частично плохо, частично не читается.
Дата загрузки:
2017 08 09
MD5:
24eb38aea745da60c430e3683e2aaaa4
Загрузки:
579
Информация
1. Specifications 1
2. Description 2
3. Installation 3
4. Operation 4
ILLUSTRATIONS
Schematic Diagram 9