Collins Telecommunications DL-1 Другой
Производитель:
Фотография недоступна!
Может быть, вы можете загрузить фотографию для
Collins Telecommunications DL-1 ?
Если у вас есть другие руководства для
Collins Telecommunications DL-1, вы можете загрузить файлы в здесь .
Модель:
DL-1
Дата:
1966
Категория:
Группа:
Описание:
100 Watt Resistor Load
Информация
The DL-1 is a 100-watt resistor load for use with any
100-watt Transmitter or Transceiver such as the 32S-1,
32S-3, or KWM-2. Refer to figure 1. Use of this dummy load
allows alignment or adjustment of Transmitter circuits
without sustained radiation of an interfering carrier. The
DL-1 consists of four 50-ohm Globar resistors in a
series-parallel arrangement to provide a 50-ohm resistive
load. The DL-1 may be switched locally or remotely to select
Antenna or dummy load for connection to Transmitter output.
Jacks are provided for 6.3-volt ac 50- to 60-Hz relay coil
supply, remote switching, and Transmitter and Antenna
connections. The unit can be set on a table or desk or
mounted on any chassis or rack frame by means of the two
tapped holes on the bottom. As an alternate mounting, the
four rubber feet can be removed and the unit mounted on a
flat plate with four 6-32 screws.
Hасто́льная кни́га тип:
Обслуживание и Руководство пользователя
Страницы:
4
Размер:
442.67 Kbytes (453289 Bytes)
Язык:
english
Пересмотр:
Third Printing
Hасто́льная кни́га ID:
523-0106000-101311
Дата:
1966 01 01
Качество:
Сканированный документ, читая частично плохо, частично не читается.
Дата загрузки:
2017 08 04
MD5:
d6eca3d7bb677095b036b535aeb7af24
Загрузки:
485