Electronic Navigation Industries A-500 Усилитель
Производитель:
Фотография недоступна!
Может быть, вы можете загрузить фотографию для
Electronic Navigation Industries A-500 ?
Если у вас есть другие руководства для
Electronic Navigation Industries A-500, вы можете загрузить файлы в здесь .
Модель:
A-500
Дата:
1997
Категория:
Группа:
Описание:
Power Amplifier
Информация
The ENI Model A500 is an all solid state Amplifier which has
a flat frequency response from .3 mHz to 35 mHz. It provides
500 watts of linear power with low harmonic and
Intermodulation distortion. Gain is 60 dB nominal, with a
variation of less than +1.0 dB over the entire frequency
range. Input and output impedance are 50 dims and the unit
may be driven to full power output by most RF synthesizers,
signal generators and swept signal sources.
The ENI Model A500 will deliver its rated power output into
any load impedance, regardless of match. Built-in protection
circuitry will absorb the power reflected from a mismatched
load without causing failure or oscillation.
Output RF voltage is displayed on the front panel meter. Its
integral Power Supply and cooling operate from a 230 VAC
50/60 Hz main supply.
The Model A500 will raise the power level of signal sources
and generators without requiring tuning or bandswitching.
The Class A linear circuitry will amplify signals of AM, FM,
SSB, TV and complex modulations limited only by their peak
input and bandwidth, with minimum distortion.
Hасто́льная кни́га тип:
Обслуживание и Руководство пользователя
Страницы:
46
Размер:
1.39 Mbytes (1456035 Bytes)
Язык:
english
Пересмотр:
C1
Hасто́льная кни́га ID:
A500-TM
Дата:
Качество:
Сканированный документ, читая частично плохо, частично не читается.
Дата загрузки:
2016 01 25
MD5:
ab443f7f7daaa694dd46cbf94e2c34de
Загрузки:
490