Keithley 7062 Интерфейс
Производитель:
Модель:
7062
Дата:
1984
Категория:
Группа:
Описание:
RF Switch Card

Информация

The Model 7062 is a 50Ω RF scanner card that plugs into a mainframe scanner such as the Keithley model 705 or Model 706. The Model 7062 incorporates two sets of 1 X 5, 1-pole switching. Each set has its own common (ground). The Model 7062 has channels which are unterminated when not connected from one channel to another. The insertion loss at 500MHz is less than 3dB. Since there are two 1X5 switches, each having its own common, two signals can be routed through the card simultaneously. The 1X5 switch can be cascaded with another 1X5 switch for a 1 X 10 switch with minimal loss of frequency response. There are several switching schemes that offer flexibility from the Model 7062, Refer to Section 2 Operation. Specified relay life is greater than 100,000 closures. Cables are routed from the rear of the card. The front of the card plugs into the mainframe (e.g. model 705 or Model 706). The mainframe operates in the matrix mode or 2-pole mode in order to control the channels. BNC connectors allow easy connection to input/output signal paths.

показать больше

Обслуживание и Руководство пользователя
Hасто́льная кни́га тип:
Обслуживание и Руководство пользователя
Страницы:
28
Размер:
1.11 Mbytes (1162240 Bytes)
Язык:
english
Пересмотр:
B
Hасто́льная кни́га ID:
7062-901-01
Дата:
Качество:
Электронный документ, ни сканирование, очень хорошо читается.
Дата загрузки:
2014 03 02
MD5:
8caf7f4062e7b796ac61f8026b1bffdf
Загрузки:
554

Информация

SECTION 1—General Information 1.1 Introduction ... 1 1.2 Warranty Information ... 1 1.3 Manual Addenda ... 1 1.4 Safety Symbols and Terms ... 2 1.5 Unpacking and Inspection ... 1.6 Specifications ... 2 SECTION 2—OPERATION 2.1 Introduction ... 3 2.2 Safety Precautions ... 3 2.3 Wiring ... 3 2.3.1 1X5 Switch ... 4 2.3.2 1 of 11 Switch ... 6 2.4 Installation ... 7 2.4.1 Removal ... 8 2.5 Operation ... 8 2.6 Switch Terminology ... 10 SECTION 3—SERVICE INFORMATION 3.1 Introduction ... 13 3.2 Required Test Equipment ... 13 3.3 Performance Verification ... 14 3.3.1 Insertion Loss ... 14 3.3.2 Input Isolation (Channel to Channel) ... 15 SECTION 4—REPLACEABLE PARTS 4.1 Introduction ... 17 4.2 Replaceable Parts ... 17 4.3 Ordering Information ... 17 4.4 Factory Service ... 17 4.5 Component Layout and Schematic Diagram ... 17

показать больше