Informações sobre o equipamento:

Wavetek 3006 Gerador
Fabricante:
Wavetek
Modelo: 3006
Data: 1986
Categoria: Instrumentos de medição
Grupo: Gerador
Descrição: Signal generator
Informações:
                                    INTRODUCTION

The Wavetek Modeis 3003 through 3006 are rugged, completely
solid-state Signal Generators covering the frequency range
of .001 or 1 to 520 MHz. Models 3004 and 3006 cover the
range of .001 to 520 MHz while Modeis 3003 and 3005 cover
the 1 to 520 MHz range. Modeis 3005 and 3006 offer 100 Hz
resolution while on Models 3003 and 3004 the resolution is 1
kHz. The output can be amplitude or frequency modulated and
the level can be set between +13 and -137 dBm.

1.1.1	FREQUENCY CHARACTERISTICS

The frequency of the instrument is set via 6 or 7
front-panel Lever/Indicator switches which yield a
resolution of 1 kHz or 100 Hz. In addition, remote
programmers are available to facilitate semi-automatic
programming of frequency and GPiB programming of both
frequency and output level.

The accuracy of the instrument is based on a
crystal-controlled Oscillator that serves as a stable
frequency reference that enables the instrument to provide
high-stability signals to an accuracy of 0.001% over its
specified frequency range. This accuracy includes possible
errors due to short-term drift, long-term drift, incidental
FM, and variations due to line voltage changes and
temperature changes. With the FREQUENCY VERNIER out of the
CAL position, the frequency is accurate to 0.001% ±10 k Hz.

The accuracy of the instrument can be Improved by using
either the optional External Reference input, or the
optional High Stability internal Reference. An Auxiliary
RF output option is also available to drive a Counter. Refer
to Section 1.3 for a listing of options available for each
instrument.

1.1.2	MODULATION

These instruments also feature both internal and external AM
and FM capabilities. The internal and external sources can
operate independently, or may be used simultaneously to
produce complex modulation.

Internal modulation frequencies include 400 Hz, 1000 Hz, and
two preset frequencies between 100 Hz and 10 kHz, selected
by the user.

Modulation is indicated on a front-panel meter calibrated
for full-scale readings of 30% and 100% AM, and 3, 10, 30,
and 100 kHz deviation for FM operation.

1.1.3	OUTPUT LEVEL FEATURES

The output power is indicated on a front-panel meter
calibrated in both dBm and VRMS, A fifteen-position, 10 dB/
step Attenuator used in conjunction with an 11 dB VERNIER
control provides the user with a range of +13 dBm to -137
dBm. A Programmable Attenuator option is available covering
the range of from 0 to 109.9 dB attenuation in .1 dB steps
with +13 dBm as the 0 dB reference level.

The calibrated output of the Instrument is leveled to within
±0.75 dB across the complete frequency range of the instrument.

Reverse power protection is also available as an option.

Estes manuais estão disponíveis para os equipamentos acima:

Tipo manual: Serviço e Manual do Usuário Wavetek-2760-Manual-Page-1-Picture
Páginas: 236
Tamanho: 12.90 Mbytes (13531543 Bytes)
Idioma: Inglês
Revisão: E
Manual-ID/Number: 6510-00-0024
Data: Outubro 1986
Qualidade: Documento Scaned, a leitura parcialmente mal, não parcialmente legível.
Envie data:
MD5: 09f1468d084b43d5252089e667a3e1f3
Downloads: 1148 desde 06 Novembro 2011
Informações:
Wavetek-2760-Manual-Page-1-Picture


Tipo manual: Manual do Usuário Wavetek-11121-Manual-Page-1-Picture
Páginas: 66
Tamanho: 2.47 Mbytes (2593329 Bytes)
Idioma: Inglês
Revisão:
Manual-ID/Number:
Data:
Qualidade: Documento Scaned, a leitura parcialmente mal, não parcialmente legível.
Envie data:
MD5: 91a50ae90da3121e3595a6860e47b717
Downloads: 64 desde 13 Agosto 2018
Informações:
SECTION 1	GENERAL INFORMATION

1.1	INTRODUCTION ... 1-1

1.2	SPECIFICATIONS  ... 1-2

1.3	OPTIONS ...   ... 1-4

1.4	ACCESSORIES ...  . .'
. 1-5

SECTION 2	OPERATION

2.1	INTRODUCTION ...   ...  2-1

2.2	MECHANICAL
INSTALLATION ... 2-1

2.3	ELECTRICAL INSTALLATION  ... 2-1

2.4	DESCRIPTION OF FRONT
PANEL ... 2-3

2.5	DESCRIPTION OF REAR PANEL ... , .  ... 2-3

2.6	INSTALLATION CHECKS ...  2-3

2.7	OPERATING PROCEDURE  ...  2-5
SECTION 3	THEORY OF OPERATION

3.1	INTRODUCTION ... 3-1

3.2	OVERALL BLOCK DIAGRAM.  ...   ... 3-1

3.3	C315-2- METER BOARD ... 3-6

3.4	'	MODULATION BOARD ...  3-9

3.5	DPS2A - Power supply ... ' ... 3-9

3.6	DELETED ... 3-11

3.7	M9W-SWEEP Oscillator ...  .3-11

3.8	M10W-6/M1QW-8-OUTPUT Amplifier ... 3-11

3.9	M172-SWEEP DRIVE/DAC ... 3-13

3.10	M29-1 - FM REFERENCE ... 3-13

3.11	M30-1/M30-4 - CRYSTAL REFERENCE, .	 ... 3-13

o.1 2	M31A - kHz STEPS..
 ...   ... 3-16

3.14	M149- 100 Hz STEPS ... ' ... ■ ... 
.3*18.

3.15	M33-1 ■■ NARROW Oscillator LOCK ... - ... 3-19

3.16	IVI34 - WIDE Oscillator LOCK.,
 ...  . .3-19

3.17	M115 - DOWN Converter ... ' ... 3-22

SECTION 4	PERFORMANCE TESTS

4.1	INTRODUCTION ... ' ... 4-1

4.2	FREQUENCY RANGE AND RESOLUTION TEST ... 4-4

4.3	FREQUENCY ACCURACY TEST ... 4-5

4.4	FREQUENCY STABILITY TEST ... 4-6

4.5	OUTPUT LEVEL ACCURACY TESTS ... 4-6

4.6	HARMONICS TEST ... 4-10

4.7	NON-HARMONICS TEST ... 4-11

4.8	RESIDUAL AM TEST ...  . .4-12

4.9	RESIDUAL FM TEST ... 4-13

4.10	INTERNAL MODULATION FREQUENCY ACCURACY TEST ... 4-14

4.11	PERCENT AM ACCURACY TEST ...  .4-14

4.12	AM BANDWIDTH
TEST ... 4-15

4.13	AM DISTORTION TEST ... 4-16

4.14	FM DEVIATION TEST ... 4-17

4.15	FM BANDWIDTH TEST.  ... 4-18

4-16	FM DISTORTION TEST ... 4-19

4.17	IMPEDANCE TEST ... 4-19

4.18	RFI TEST ... 4-20

***	PERFORMANCE TEST RECORD ... 4-23
Wavetek-11121-Manual-Page-1-Picture


Comments (1)

 
Topic: Wavetek 3006
0/5 (0)
 
Gravatar
New
ted
Gravatar
1
0
0
Apr 2015
First Poster
ted says...
have one working and another for parts
 
Page 1 of 1
 

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics