Trio Electronics TR-9500 Transceiver
Fabricante:
Modelo:
TR-9500
Data:
Categoria:
Grupo:
Descrição:
UHF All Mode Transceiver

Informação

FEATURES 1. 70cm all band Transceiver for FM, SSB (USB, LSB), and CW operation. 2. Rotary click, 100Hz step digital 2-VFO system specifically designed for mobile operation. 3. Five-digit display indicates frequency of all operating modes. 4. TX OFFSET switch shifts frequencies - 1.6 MHz and + 1.6 MHz in the low band for standard Repeater operation. 5. Six memory channels. Two different frequencies (transmit and receive) are stored in CH6, permitting "odd-split" Repeater operation in FM mode. 6. Frequencies are searched quickly and automatically in SSB and CW mode by the digital step switch. 7. With the MHz switch set to ON, the operating frequency can be changed in MHz step by using the main dial or the UP/DOWN switch on the microphone. 8. Incorporates auto scan circuit (BUSY signal stops in FM mode). 9. The Transceiver has a memory scan circuit which scans only the channels stored in the memory. 10. The Transceiver also has an MHz scan circuit which operates with the MHz switch. 11. In the SSB/CW mode, the transmit frequency is variable and can be used for Oscar communication. 12. Hand microphone with frequency UP-DOWN switch. 13. Automatic selection of RIT, NB, RF GAIN and AGC. Selfcontained side tone circuit. 14. Unique escutcheon design allows easy installation for mobile operation. 15. Full variety of accessory terminals (KEY, BACK UP, STBY, EXT SP).

mostrar mais

Serviço e Manual do Usuário
Tipo de manual:
Serviço e Manual do Usuário
Páginas:
19
Tamanho:
990.06 Kbytes (1013821 Bytes)
Idioma:
english
Revisão:
ID de manual:
Data:
Qualidade:
Documento Scaned, a leitura parcialmente mal, não parcialmente legível.
Data de upload:
2018 07 13
MD5:
85a3fb1412dd75f5a18decc810b8f12e
Downloads:
467

Informação

Instruction Manual CONTENTS FEATURES ... ... 3 BEFORE USE ... 3 SPECIFICATIONS ... 4 SECTION 1. PREPARATION FOR USE ... 5 1.1 Accessories ... 5 1.2 Installation ... 5 SECTION 2. CONTROLS AND TERMINALS ... 8 2.1 Front panel ... 8 2.2 Rear panel ... 10 SECTION 3. OPERATION ... 11 3.1 Mode switch ... 11 3.2 Digital VFO ... ... 11 3.3 MHz switch ... 11 3.4 DS switch ... 11 3.5 Memory ... 12 3.6 Scan ... 12 3.7 TX Offset switch ... 13 3.8 Squelch ... 13 3.9 RIT and RIT switch ... 13 3.10 NB (Noise blanker) ... 13 3.11 RF GAIN and S meter ... 13 3.12 T ransmitter precautions ... 14 3.13 CW operation ... 14 SECTION 4. OPTIONAL ACCESSORIES ... 16 BLOCK DIAGRAMS ... 17 SCHEMATIC DIAGRAMS ... 19

mostrar mais