JBL 6007 Amplificador
Fabricante:
Modelo:
6007
Data:
1978
Categoria:
Grupo:
Descrição:

Informação

The Amplifier shall be single channel with an input gain control and an output level meter on the front panel. The Amplifier shall accommodate an unbalanced high impedance input, or a balanced low impedance input with an optional plug-in accessory transformer. The Amplifier shall be capable of delivering a minimum of 60 W, continuous sine wave, 20 Hz-20 kHz, into a 4 Q load. 6007) The Amplifier shall incorporate an output transformer allowing full power operation, 35 Hz-20 kHz, into an 8 Cl, 16 Cl or 70.7 V line as well as a direct output terminal for a 4 O load.) [6008: No output transformer and only a direct output terminal shall be provided, but it shall be possible to install an output transformer easily at any time.) The Amplifier shall have < 0.2% THD, 20 Hz-20 kHz, @ 60 W, direct output. 6007) The Amplifier shall have < 0.2% THD, 35 Hz-20 kHz, @ 60 W, transformer output.) Frequency response shall be ± 0.5 dB, 20 Hz-20 kHz, @ 1 W. Power bandwidth shall be 10 Hz-40 kHz. Construction of the Amplifier shall be modular. The entire Amplifier circuit, except for the power supply 6007) and output transformer) shall be mounted on a single circuit board attached to the heat sink, which assembly shall be removable from the unit with the mainframe still mounted in a rack. Cables connecting the circuit board to the mainframe shall be of a length sufficient to allow removal of the board without disconnection and shall disconnect easily at two plugs. The Amplifier shall occupy three standard EIA rack spaces and shall operate on 120/240 V AC, 50/60 Hz.

mostrar mais

Serviço e Manual do Usuário
Tipo de manual:
Serviço e Manual do Usuário
Páginas:
14
Tamanho:
2.63 Mbytes (2753701 Bytes)
Idioma:
english
Revisão:
ID de manual:
Data:
1978 10 01
Qualidade:
Scaned documento, todas legível.
Data de upload:
2017 10 29
MD5:
abf3356f2e965a75ffb8e56433474898
Downloads:
1065