Informações sobre o equipamento:

Orban OPTIMOD-FM 8100ATX2 Effect Processor
Modelo: OPTIMOD-FM 8100ATX2
Data: 1993
Categoria: Equipamento profissional da música
Grupo: Effect Processor
Descrição: Six-Band Limiter Processor
                                    The Orban Model 8100A/XT2 Six-Band Limiter Accessory Chassis
was designed for those stations that need a “louder” or more
processed sound than that provided by an OPTIMOD-FM used
alone and in the recommended manner. The XT2 provides the
means to fine-tune your on-air sound through precise control
of Bass and treble sound texture, program density, and
program dynamics.

The XT2 is designed to give you:

-	Increased loudness for a given level of audible processing
side-effects (compared to an unmodified 8100A/1).

-	Improved consistency from source to source, due to the
“automatic equalization” effect of the six-band limiter.

-	Increased presence and intelligibility on smaller radios
and in autos.

-	Control of Bass and high-frequency equalization.

The XT2 is particularly well-suited for highly competitive
pop music formats, such as AOR, CHR, AC, and Urban
Contemporary. Oldie and BeautiM formats can also benefit
from the improved consistency that the XT2’s “automatic
equalization” can provide. Because it has been specifically
“tuned” to the OPTIMOD-FM, it produces less processing
side-effects than do complex processing systems that use
OPTIMOD-FM cascaded with other processors. (The XT2 cannot
be used with other audio processors or as a stand alone unit.)

In general, the 8100A/1 + XT2 System will be only slightly
louder than an 8100A/1 alone, operated with very fast
release times and large amounts of clipping. This is because
the loudness capabilities of an audio processor system are
primarily determined by the design of the peak-limiting
system, and the XT2’s peak-limiting system is very similar
to the highly sophisticated, patented system used in the

Any loudness increase produced by the XT2 results from two
characteristics: 1) the XT2 can automatically re-equalize
dull program material, increasing energy in the frequency
range to which the ear is most sensitive, and 2) XT2
processing reduces voice level by comparison to music. Since
the clipping level in a processor system must often be set
to avoid audible voice distortion, the XT2 permits the
processor to be adjusted to produce higher loudness on music
before voice distortion becomes objectionable.

Because of the XT2’s “automatic equalization” of program
material, there is some material (notably “heavy metal” with
extreme amounts of 3kHz energy) which will actually be
quieter through the XT2 than through the 8100A/1 alone
because the amount of 3kHz energy (to which the ear is
maximally sensitive) will be reduced by the XT2.

The primary advantages of the 8100A/1 + XT2 System are
improved consistency, increased brightness on naturally dull
program material, and reduction of audible processing side

—	all while retaining or slightly exceeding the high
loudness capabilities of an aggressively operated 8100A/1.

Estes manuais estão disponíveis para os equipamentos acima:

Tipo manual: Serviço e Manual do Usuário Orban-9781-Manual-Page-1-Picture
Páginas: 97
Tamanho: 8.19 Mbytes (8582916 Bytes)
Idioma: Inglês
Manual-ID/Number: 800111-000-09
Data: 01 Julho 1993
Qualidade: Documento Scaned, a leitura parcialmente mal, não parcialmente legível.
Envie data:
MD5: ccfee41a47a41899c1c36971f9025ad8
Downloads: 131 desde 26 Outubro 2017

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics