Informações sobre o equipamento:

RIGOL Technologies Inc. DG2041A Gerador
Fabricante:
RIGOL Technologies Inc.
Modelo: DG2041A
Data: 2008
Categoria: Instrumentos de medição
Grupo: Gerador
Descrição: Function/Arbitrary Waveform Generator
Informações:
                                    RIGOL DG2000 Series Function/ Arbitrary Waveform Generator
adopt the direct
digital Synthesizer (DDS) technology, which can provide
stable, high-precision, pure
and low distortion sine signal. It can also provide 40MHz
square waveform with fast
rising and falling edges. Its combination of excellent
system features, easiness in
usage and versatile functions makes this Generator a perfect
solution for your job now
and in the future.
DG2000 Series Function/ Arbitrary Waveform Generator have
clear and simple
Front-Panel. The user-friendly panel layout and
instructions, versatile terminals, direct
graph interface, built-in instructions and help system have
greatly simplified the
operation process. Thus, users do not have to spend a great
deal of time learning and
familiarizing the operation of the Generator before they can
use it proficiently. The
built-in AM, FM, PM, PWM and FSK modulating functions
generate modulated
waveform at ease, without the help of a separate modulating
source. The USB I/O,
LAN and GPIB are the standard configuration. Remote
instructions meet the SCPI
specification requirements.
From the characteristics and specifications given below, you
will understand how
DG2000 can satisfy your measurement requirements.
z
z
z
z
z
16+2 channels digital output module (optional) together with
the analogue
channel can rebuild the most commonly used mixed signal in
daily practice.
DDS technology provides precise, stable and low distortion
output signal.
10 standard waveforms:
Sine, Square, Ramp, Pulse, Noise, Sinc, Exponential Rise,
Exponential Fall,
Cardiac and DC.
100MSa/s sampling rate, enable to edit arbitrary waveform
with 14-bit, 512K
points.
Frequency characteristics:
Sine/ Square: 1μHz to 40 MHz
Ramp: 1μHz to 400 kHz
Pulse: 500μHz to 16MHz
White Noise: 20MHz bandwidth (-3dB)
Arbitrary waveform: 1μHz to 12MHz
Amplitude range: 2mVpp to 10Vpp (50 Ω)
40mVpp to 20Vpp (High Z)
Abundant modulation function, various modulated waveform:
AM, FM, PM, PWM
and FSK.
Linear, logarithm Sweep and Burst mode.
Abundant I/O: External Modulation Source, External 10 MHz
Reference Input,
External trigger source, waveform output, synchronous
digital signal output,
Internal 10 MHz Reference output.
Support USB storage device; store and read waveform
configure parameters or
the edited arbitrary waveform with USB devices. System
Updating could also be
performed by using USB devices.
Remote control is realized by using the LAN.
Standard interface: USB Host & Device, RS-232, GPIB.
Graph Interface which shows the signal setting directly.
Chinese/English user Interface.
Embedded Chinese/English Help System.
Support Chinese/English Input.

Estes manuais estão disponíveis para os equipamentos acima:

Tipo manual: Manual do Usuário Rigol-9002-Manual-Page-1-Picture
Páginas: 161
Tamanho: 887.64 Kbytes (908947 Bytes)
Idioma: Inglês
Revisão:
Manual-ID/Number: UGB02101-1110
Data: 01 Outubro 2008
Qualidade: Documento eletrônico, digitalização, bem legível.
Envie data:
MD5: a2999053dffb012e8ce4bfd9a768abb3
Downloads: 207 desde 13 Maio 2017
Informações:
Safety Notices
 ... II
The Introduction of DG2000 Series
 ...  V
Chapter 1
 Getting Started
 ... 
1-1
General
Inspection ... 
1-2
Handle Adjustment
 ... 
1-3
The Front/Rear Panel
 ... 
1-4
The DG2000 User Interface
 ... 
1-7
To Set a Waveform
 ... 
1-8
To Set Modulate/
Sweep/Burst ... 1-11
To Set Trigger/Output
 ... 1-13
To Use Digital Input
 ... 1-14
To Use Store/Utility/Help
Function ... 1-15
Chapter 2
 Operating Your Generator
 ...  2-1
The Menu/Graph
Mode ... 
2-2
To Set Sine Signals
 ... 
2-3
To Set Square Signals
 ... 
2-7
To Set Ramp Signals
 ... 2-10
To Set Pulse
Signals ... 2-12
To Set Noise Signals
 ... 2-16
To Set Arbitrary
Signals ... 2-17
To Generate the Modulated Waveform
 ... 2-30
To Generate Sweep
 ... 2-42
To Generate
Burst ... 2-45
To Store and
Recall ... 2-49
To Set the Utility Function
 ... 2-58
How to Use the Built-in Help System
 ... 2-81
Chapter 3
 Application & Examples
 ...  3-1
Example
 1:
 To
 Generate a Sine
Wave ...  3-1
Example
 2:
 To
 generate a Square Wave
 ...  3-2
Example
 3:
 To
 generate a Ramp Wave
 ...  3-3
Example
 4:
 To
 generate a Pulse
Wave ...  3-4
Example
 5:
 To
 Generate a Noise Wave
 ...  3-6
Example
 6:
 To
 generate Arbitrary
Waveform ...  3-7
Example
 7:
 To
 Create an Arbitrary Waveform
 ...  3-8
Example
 8: To Generate an AM Waveform
 ...  3-10
Example
 9: To Generate an FSK Waveform
 ...  3-12
Example
 10: To generate a PWM
Waveform ...  3-14
Example
 11: To generate a Linear Sweep
 ...  3-16
Example
 12: To generate a Burst Waveform
 ...  3-18
Chapter 4
 Prompt messages & troubleshooting
 ...  4-1
Prompting
Messages ... 
4-1
Troubleshooting
 ... 
4-17
Chapter 5
 Specifications
 ... 
5-1
Specifications ... 
5-2
General
Specifications ... 
5-7
Chapter 6
 Appendix ...  6-1
Appendix
 A DG2000 Series Accessories
 ...  6-1
Appendix
 B
Warranty ... 
6-2
Appendix
 C General Care and Cleaning
 ...  6-3
Appendix
 D Contact RIGOL
 ... 
6-4
Index
 ... 
I
Rigol-9002-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics