Informações sobre o equipamento:
|Tektronix 485 Osciloscópio|
|Categoria:||Instrumentos de medição|
|Descrição:||350 MHz DUAL TRACE OSCILLOSCOPE|
350 MHz at 5 mV/div 1 ns/div Sweep Rate 2.0 div/ns Writing Speed 1 MΩ & 50 Ω Input Impedances Input Protection 50 Ω Internal Automatic Deflection Factor Readout Pushbutton Ext Trigger View Battery Operation (Optional) Weighs »9.5 kg (21 lb) At just 21 pounds, the 1 ns/div, dual-trace, 350 MHz 485 Oscilloscope is highly compatible with today's increasing technology. Fast 2.0 div/ns writing speed makes it especially attractive for use in field research environments. The 485 features a wide bandwidth at its full 5 mV/div vertical sensitivity (350 MHz at 50 Ω and 250 MHz at 1 ΜΩ). Selectable input impedance provides the capability to measure low and high impedance points with the same scope and without active probes. Internal detection circuitry protects the 50 Ω input by automatically disconnecting when the signal exceeds approximately 50 V RMS. You no longer have to mentally compensate for attenuating probes. Automatic vertical scale-factor readout is provided by three light-emitting diodes located around the edge of each input attenuator knob. A quick glance tells the correct on-screen V/div when the recommended 10X or 100X probes are used. You always know exactly where you are in a pulse train when making a delayed sweep measurement. An alternate sweep mode allows the delayed sweep to appear alternately with the intensified main sweep. In this mode, you can view the intensified zone and the delayed display simultaneously. The external trigger signal can be easily viewed on the 485. A front-panel pushbutton automatically routes the external signal used to trigger time base A to the vertical deflection Amplifier. This feature can also be used to quickly make time comparisons between the signal of interest and the external trigger signal. On the 485, focus is always correct for single-shot photography. An autofocus circuit eliminates the need to readjust the focus each time the intensity is changed. When commercial power is not available, use the 1105 Battery Power Supply. It weighs only 19.5 pounds, and lets you take the high-per- formance 485 virtually anywhere.
Estes manuais estão disponíveis para os equipamentos acima:
|Tektronix -- 485 -- folha de dados|
|Tipo manual:||folha de dados|
|Tamanho:||328.67 Kbytes (336563 Bytes)|
|Qualidade:||Scaned documento, todas legível.|
|Envie data:||28 Novembro 2014|
|Downloads:||595 desde 28 Novembro 2014|
|Tektronix -- 485 -- Serviço e Manual do Usuário|
|Tipo manual:||Serviço e Manual do Usuário|
|Tamanho:||30.84 Mbytes (32335934 Bytes)|
|Data:||01 Janeiro 1978|
|Qualidade:||Scaned documento, todas legível.|
|Envie data:||23 Abril 2017|
|Downloads:||438 desde 23 Abril 2017|
TABLE OF CONTENTS SPECIFICATION Page Introduction 1-1 Vertical Deflection System 1-1 Probe Performance 1-3 A and B Triggering 1-3 Horizontal Deflection 1-4 Calibrated Sweep Delay 1-4 X-Y 1-5 CRT 1-5 Calibrator 1-6 Other Characteristics 1-6 Environmental Characteristics 1-6 OPERATING INSTRUCTIONS General 2-1 Preliminary Information 2-1 Controls and Connections 2-1 Front Panel 2-1 Rear Panel 2-4 Bottom Side 2-4 CIRCUIT DESCRIPTION Introduction 3-1 50 n Attenuator 3-1 1 Megohm Buffer Amplifier 3-1 50 SI Overload Protection 3-1 Vertical Preamplifier 3-1 Signal Channel Switch 3-2 Internal Trigger Amplifier 3-2 Main Vertical Amplifier 3-2 Scale Factor Readout 3-3 Vertical Mode Control 3-3 Z Axis 3-3 A Trigger Amplifier 3-3 A EXT Trigger Identify 3-3 A Trigger Generator 3-4 B Trigger Generator 3-4 A and B Sweeps 3-4 Horizontal Amplifier 3-5 Horizontal Control 3-5 Power Inverter/Regulator 3-6 Line Filter 3-6 Line Input Circuit 3-6 Start Network 3-7 Inverter 3-8 Inverter/Regulator 3-8 Inverter Current Limiting Circuit 3-8 Overvoltage Stop Circuit 3-8 Line Stop Circuit and Surge Limiting 3-8 Procedure for Converting the 485 to DC Operation 3-9 Low Voltage Supplies 3-9 Power supply Protection Circuit 3-10 Stop Monostable 3-10 Balance Node 3-10 Overcurrent Protection 3-12 Low Line Voltage Protection 3-12 Sampling Period Timer and Over- Voltage Protection 3-12 CRT Circuit 3-12 Filament Voltage 3-12 High Voltage Supplies 3-12 Anode Supply 3-12 Cathode Supply 3-12 Cathode Regulator 3-12 Grid DC Restorer 3-13 SECTION 3 CIRCUIT DESCRIPTION (cont) Page Focus DC Restorer 3-13 Beam Current Limit 3-14 Power supply Shutdown Caused by Excessive Beam Current 3-14 CRT Control Circuits 3-14 Auto Focus Circuit 3-14 Calibrator 3-15 SECTION 4 MAINTENANCE Introduction 4-1 Cover Removal and Reinstallation 4-1 Cleaning 4-1 Lubrication 4-2 Visual Inspection 4-3 Semiconductor Checks 4-3 Recalibration 4-3 Troubleshooting 4-3 Introduction 4-3 Troubleshooting Aids 4-3 Circuit Boards 4-3 Troubleshooting Equipment 4-5 Troubleshooting Techniques 4-6 Special Troubleshooting Information 4-7 Corrective Maintenance 4-11 Obtaining Replacement Parts 4-11 Soldering Techniques 4-11 Component Replacement 4-12 Circuit Board Replacement 4-12 Timing Board Removal 4-12 Transformer Board Removal 4-13 Inverter Board Removal 4-14 Semiconductor Replacement 4-14 Circuit Board Pins 4-14 End Lead Pin Connectors 4-15 Cathode Ray Tube Replacement 4-15 Repackaging for Shipment 4-15 Interboard Comb Connection Locations 4-16 SECTION 5 CALIBRATION Introduction 5-1 Tektronix Field Service 5-1 Using This Procedure 5-1 Test Equipment Required 5-1 Special Calibration Fixtures 5-1 Calibration Equipment Alternatives 5-4 Performance Check 5-4 Calibration Procedure 5-8 SECTION 6 RACKMOUNTING Introduction 6-1 Rack Dimensions 6-1 Slide Out Tracks 6-1 Mounting Procedure 6-1 Alternate Rear Mounting Methods 6-2 Removing or Installing the Instrument 6-2 Slide Out Track Lubrication 6-2 SECTION 7 ELECTRICAL PARTS LIST
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.