1 Safety Precaution -------------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Flash PCB------------------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1. Prevention of Electrostatic Discharge (ESD) to ElectrostaticallySensitive (ES) Devices -----------5 2.2. How to Recycle the Lithium Ion Battery (U.S. Only)-----------------------------------------------------------5 2.3. Caution for AC Cord(For EB/GC/SG) -----------------6 2.4. How to Replace the Lithium Battery-------------------7 3 Service Navigation------------------------------------------------8 3.1. Introduction --------------------------------------------------8 3.2. General Description About Lead Free Solder (PbF) ----------------------------------------------------------8 3.3. Important Notice 1:(Other than U.S.A. and Canadian Market) ------------------------------------------8 3.4. How to Define the Model Suffix (NTSC or PAL model)---------------------------------------------------------9 4 Specifications ---------------------------------------------------- 12 5 Location of Controls and Components 13 6 Service Mode ----------------------------------------------------- 15 6.1. Error Code Memory Function ------------------------- 15 6.2. Confirmation of Firmware Version ------------------- 18 7 Service Fixture & Tools --------------------------------------- 19 7.1. Service Fixture and Tools ------------------------------ 19 7.2. When Replacing the Main PCB ---------------------- 20 7.3. Service Position ------------------------------------------ 20 8 Disassembly and Assembly Instructions --------------- 22 8.1. Disassembly Flow Chart-------------------------------- 22 8.2. PCB Location---------------------------------------------- 22 8.3. Disassembly Procedure -------------------------------- 23 8.4. Disassembly Procedure for the Lens --------------- 28 8.5. Assembly Procedure for the Lens ------------------- 31 8.6. Removal of the CCD Unit ------------------------------ 35 8.7. Removal of the Zoom Motor Unit -------------------- 35 8.8. Removal of the Focus Motor Unit -------------------- 36 8.9. The Applyment of Grease Method------------------- 36 9 Measurements and Adjustments -------------------------- 37 9.1. Matrix Chart for Replaced Part and Necessary Adjustment ------------------------------------------------- 37 10 Maintenace -------------------------------------------------------- 38 10.1. Cleaning Lens and LCD Panel ----------------------- 38