Xantrex XPH 35-4T Fonte de alimentação
Fabricante:
Modelo:
XPH 35-4T
Data:
2008
Categoria:
Grupo:
Descrição:
Dual and Triple Output 35V 4A DC Power Supply

Informação

The XPH 35-4D and XPH 35-4Tv provide high levels of power (up to 305 watts) in a compact and attractive case style. High resolution controls allow precise setting of voltage and current levels which are indicated on accurate and legible digital meters. Excellent line and load regulation are matched by low noise and good transient response. High power efficiency ensures that the unit remains cool without any fan noise. The XPH 35-4D has two independent and isolated outputs each with a 0 to 35V, 0 to 4A capability. The outputs operate in constant voltage or constant current mode with automatic cross- over and mode indication. Each output has its own on-off switch. Where higher voltages or currents are required the outputs can be wired in either series or parallel to provide voltages up to 70 volts or currents up to 8 Amps. The XPH 35-4T has, in addition, an Auxiliary ‘logic voltage’ output with a 5A current capability. To reflect the increasing usage of low-voltage logic devices, this output can be preset between 1.5 volts and 5 volts via a front panel control. The total power capability is 280 watts for the dual supply and 305 watts for the triple. The XPH series incorporates separate digital voltage and current meters on each main output. The meters use bright 14mm (0·56”) LED displays and have an update rate of 4 per second providing near instantaneous response. Simultaneous metering of voltage and current provides accurate information “at a glance” and avoids any possibility of misinterpretation. When an output switch is set to “off”, the current limit setting is displayed enabling conditions to be set before the load is connected. With the right-hand main output off, the right-hand meters can be used to momentarily display the preset Auxiliary voltage and current limit. The XPH series has been designed to meet the stringent requirements of relevant IEC standards for safety and EMC, including harmonics emissions. All outputs are intrinsically short circuit proof, and are protected against external voltages and reverse currents.

mostrar mais

Manual do Usuário
Tipo de manual:
Manual do Usuário
Páginas:
37
Tamanho:
577.59 Kbytes (591455 Bytes)
Idioma:
english, german, french, italian, spanish
Revisão:
4
ID de manual:
975-0101-01-04
Data:
2008 04 01
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2019 08 18
MD5:
c8261b85af42d4aa3f24c104c5228f60
Downloads:
606

Informação

Introduction Specification EMC Safety Installation Connections Operation - Main Outputs Operation - Auxiliary Output Operation - General Calibration Maintenance Instructions en Francais Sécurité Installation Connexions Fonctionnement - Sorties principales Fonctionnement – Sortie Auxiliaire Fonctionnement - Généralités Maintenance Bedienungsanleitung auf Deutsch Sicherheit Installation Anschlüsse Betrieb - Hauptausgänge Betrieb – Hilfsausgang Betrieb - Allgemein Wartung Istruzioni in Italiano Sicurezza Installazione Collegamenti Funzionamento - Uscite principali Funzionamento – Uscita Ausiliaria Funzionamento - Generale Manutenzione Instrucciones en Español Seguridad Instalación Conexiones Operación - Salidas Principales Operación – Salida Auxiliar Operación - General Mantenimiento Warranty Information

mostrar mais