Tektronix TDS 680C Osciloscópio
Fabricante:
Modelo:
TDS 680C
Data:
1999
Categoria:
Grupo:
Descrição:
Digital Real-Time™ Oscilloscopes

Informação

Whether you are working on next generation microprocessor designs, high-speed data communications equipment, or in high-energy physics research, the TDS 694C captures your fastest signals with the best fidelity and resolution available. Its 3 GHz bandwidth preserves your waveform’s fast rising edges and accurately shows signal details. With 10 GS/s digitizing rate simultaneously on all four channels and a high-stability timebase, the TDS 694C makes your critical timing measurements with the highest resolution and accuracy – even channel-to-channel measurements made in a single acquisition. The TDS 600C oscilloscopes incorporate all the advanced trigger features you expect in a high performance Oscilloscope. The TDS 694C can be configured for cross triggering with a Tektronix TLA 700 Logic Analyzer. The TDS 600C oscilloscopes give you the total solution to your digital design characterization and debugging needs. Now you have the tool you need to verify design margins, characterize setup and hold times, and measure clock-to-data skew on the fastest digital designs. The TDS 600C offers 29 automatic measurements, with measurement statistics, to make your design verification and characterization job much faster and easier. Available Java-based application packages for Jitter Analysis, Disk Drive measurements and Processor Specification measurements provide customized measurements and analysis capability. The TDS 600C gives you the performance and features you need to get your job done faster and more thoroughly.

mostrar mais

folha de dados
Tipo de manual:
folha de dados
Páginas:
2
Tamanho:
45.33 Kbytes (46417 Bytes)
Idioma:
english
Revisão:
ID de manual:
55W-10066-6
Data:
1998 01 01
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2017 12 28
MD5:
494126660c8c6fdf0e80d713016d8139
Downloads:
2366
Manual de serviço
Tipo de manual:
Manual de serviço
Páginas:
330
Tamanho:
4.28 Mbytes (4491816 Bytes)
Idioma:
english
Revisão:
ID de manual:
071-0627-02
Data:
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2017 12 25
MD5:
800d42e6f00f29ebddae10b84749d59c
Downloads:
7913

Informação

This manual is divided into sections, such as Specifications and Theory of Operation. Further, it is divided into subsections, such as Product Description and Removal and Installation Procedures. Sections containing procedures also contain introductions to those procedures. Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following is a brief description of each manual section. H Specifications contains a product description of the TDS 500D, TDS 600C TDS 700D and TDS 714L Oscilloscopes and tables of the characteristics and descriptions that apply to it. H Operating Information includes general information and operating instruc- tions at the level needed to safely power on and service this Oscilloscope. A statement of the service strategy that this manual supports, and instructions for shipment of the oscilloscopes are found in this section. H Theory of Operation contains circuit descriptions that support general service and fault isolation. H Performance Verification contains a collection of procedures for confirming that these oscilloscopes function properly and meet warranted limits. H Adjustment Procedures contains a collection of procedures for adjusting these oscilloscopes to meet warranted limits. Maintenance contains information and procedures for doing preventive and corrective maintenance of these oscilloscopes. Instructions for cleaning, for module removal and installation, and for fault isolation to a module are found here. Options contains information on servicing any of the factory-installed options that may be present in your Oscilloscope. Electrical Parts List contains a statement referring you to Mechanical Replaceable Parts, where both electrical and mechanical modules are listed. Diagrams contains a block diagram and an interconnection diagram useful for isolating failed modules. Mechanical Parts List includes a table of all replaceable modules, their descriptions, and their Tektronix part numbers.

mostrar mais

folha de dados
Tipo de manual:
folha de dados
Páginas:
4
Tamanho:
825.54 Kbytes (845349 Bytes)
Idioma:
english
Revisão:
ID de manual:
55W-10066-7
Data:
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2014 11 23
MD5:
befa4fc33c0faaded30ea05b9bd2cec5
Downloads:
2404