Tektronix AWG430 Gerador
Fabricante:
Modelo:
AWG430
Data:
Categoria:
Grupo:
Descrição:
200 MS/s Arbitrary Waveform Generator

Informação

The AWG400-Series Arbitrary Waveform Generator is a programmable Arbitrary Waveform Generator which has a maximum 200 MS/s, 4 M word per channel waveform memory and 16-bits DAC. Amplitude is programmable up to 2.0 V (Complementary output) or {5 V (Single-Ended output) optional} peak-to-peak into 50 W with independent offset control. The exterior of the AWG400-Series Arbitrary Waveform Generator is similar to the AWG500/AWG600-series product, except that the parameters and operating menus are displayed on an LCD color monitor instead of a monotone CRT (cathode ray tube). The instrument can be manually controlled from the front panel and remotely programmed via a GPIB (General Purpose Interface Bus) or Network. The AWG400-Series Arbitrary Waveform Generator GPIB is compatible with other devices that meet IEEE standard 488.2. The AWG400-Series Arbitrary Waveform Generator allows you to create sine, triangle, square, ramp, and complex waves, as well as direct current and noise signals. It allows you to set waveform attributes, such as frequency, amplitude, and offset. This instrument contains a hard disk drive, a 3.5-inch floppy disk drive, and an Ethernet Interface for storing and recalling waveform data and instrument settings. Main Features The AWG400-Series Arbitrary Waveform Generator contains the following main features: 200 MS/s sampling rate 16-bit DA Converter 4 M-word waveform memory Two arbitrary marker outputs per channel Five waveform editors

mostrar mais

Manual de serviço
Tipo de manual:
Manual de serviço
Páginas:
322
Tamanho:
4.92 Mbytes (5155008 Bytes)
Idioma:
english
Revisão:
ID de manual:
070-A811-52
Data:
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2019 09 22
MD5:
94900de799738e9f074028f65d7e108a
Downloads:
786

Informação

This manual is divided into sections, such as Specifications and Theory of Operation. Further, some sections are divided into subsections, such as Product Description and Removal and Installation Procedures. Sections containing procedures also contain introductions to those procedures. Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following contains a brief description of each manual section. Specifications contains a description of the waveform Generator and the characteristics that apply to it. Operating Information includes general information and operating instructions. Theory of Operation contains circuit descriptions that support service to the module level. Performance Verification contains procedures for confirming that the waveform Generator functions properly and meets warranted limits. Adjustment Procedures contains information that you need to manually adjust the waveform Generator so that it meets specifications. Maintenance contains information and procedures for performing preventive and corrective maintenance of the waveform Generator. These instructions include cleaning, module removal and installation, and fault isolation to the module. Options contains information on servicing factory-installed options. Replaceable Electrical Parts contains a statement referring you to Replaceable Mechanical Parts, where both electrical and mechanical modules are listed. Diagrams contains block diagrams and an interconnection diagram. Replaceable Mechanical Parts includes a table of all replaceable modules, their descriptions, and their Tektronix part numbers.

mostrar mais