Sony RM-PJVW10 Projetor
Fabricante:
Nenhuma foto disponível!
Talvez você possa carregar uma foto para os
Sony RM-PJVW10 ?
Se você tem outros manuais para os
Sony RM-PJVW10 você pode carregar os arquivos aqui .
Modelo:
RM-PJVW10
Data:
1999
Categoria:
Grupo:
Descrição:
Informação
High brightness, high picture quality
• New, wide LCD panel
The new high-resolution wide LCD panel (1366 ×
768 dots) provides higher uniformity, reduced ghosts
and an improved contrast ratio.
• High-brightness – 1000 ANSI lumens
The LCD panel with its new 200W UHP lamp,
optical unit and lens achieves a high brightness of
1000 ANSI lumens (16:9 projection), allowing for
improved home viewing.
• High-quality image
In addition to the new wide LCD panel, a variety of
functions are now available in the Projector. These
include DRC-MF (Digital Reality Creation
Multifunction) (Sony’s proprietary high-quality
image technology); 3-D Gamma Correction,
providing excellent uniformity; Cinema Black Mode,
a mode that reduces the black level according to the
input source/projection environment; and 3-D YC
Separation/DNR (NTSC), a feature that reproduces a
clear image without noise.
High-adaptability in the home
environment
• Reduced noise
The exhaust opening at the front is connected to an
internal fan and air duct. This means the distance
from the fan to the exhaust opening is long,
significantly reducing fan noise.
• Flexible setup
The projection lens has a short focus (90 inches with
2.9m (9.5 feet) (16:9)). The digital keystone
correction function allows projection at a wide angle.
The projector’s white color goes with any color
(ceilings, walls, etc.).
Wide Screen/DTV/High Definition
Television
• Wide Screen
This Projector utilizes a 16:9 aspect ratio LCD panel,
allowing seven screen modes (ZOOM, FULL,
SUBTITLE, WIDE ZOOM, etc.) using all panel
pixels (1366 × 768).
It allows NORMAL THROUGH mode and FULL
THROUGH mode as the through mode that
reproduces a Sharp image with one-to-one mapping.
• DVD, DTV, High-Definition Television
The projector’s super-precise image exceeds 3.14
million pixels. It is also compatible with next-
generation DTV (digital TV) and high-definition
television signals. Combined with a tuner or a
MUSE decoder (optional), you can enjoy DTV,
high-definition television, high- definition LD, etc.
Video Memory
The Projector has a video memory function. The user
can store up to 6 settings (image quality, aspect,
temperature color, DRC-MF, etc.) according to the
input source. The user can directly recall any setting
from the Remote Commander.
Multi scan compatibility
• Scan converter built-in
This Projector has a built-in scan converter which
converts the input signal within 1366 × 768 pixels.
• Input signals
The Projector can accept the following video signals:
Composite, S-video, Component, Progressive
component, DTV (480i/p, 720p/1080i), HDTV, 15k
RGB, VGA, SVGA, XGA and SXGA.
• Compatible with six color systems
NTSC 3.58, PAL, SECAM, NTSC 4.431), PAL-M or
PAL-N color system can be selected automatically or
manually.
.......................................................................................
• VGA, SVGA, XGA and SXGA are registered trademarks
of the International Business Machines Corporation,
U.S.A.
• VESA is a registered trademark of the Video Electronics
Standard Association.
• IBM and PC/AT are a trademark and a registered
trademark of the International Business Machines
Corporation, U.S.A.
• Macintosh is a registered trademark of Apple Computer,
Inc.
• NEC is a registered trademark of NEC Corporation.
• PC-98 is a trademark of NEC Corporation.
Tipo de manual:
Manual de serviço
Páginas:
118
Tamanho:
11.15 Mbytes (11691809 Bytes)
Idioma:
english
Revisão:
ID de manual:
9-929-674-01
Data:
1999 11 01
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
2018 12 30
MD5:
cf6c7e38bd15e30e6abb6d1d8b1f0d9b
Downloads:
882
Informação
1.Operating Instructions
Operating Instructions ... 1-1
2. Service Informations
2-1.
2-2.
2-3.
2-4.
2-5.
2-6.
2-7.
2-8.
2-9.
2-10.
2-11.
2-12.
Circuit Boards Location ... 2-1
Cabinet Assy Removal ... 2-2
Front Panel Assy Removal ... 2-2
G and GA Boards Removal ... 2-3
C Board Removal ... 2-3
B and Q Boards Removal ... 2-4
Optical Unit Assy Removal ... 2-4
TH, U, BM and V Boards Removal ... 2-5
Power Block Removal ... 2-5
Lens Assy Removal ... 2-6
Prism Block Removal ... 2-6
Note on Lamp Breakage ... 2-7
3. Electrical Adjustments
3-1.
3-2.
3-3.
Preparations ... 3-1
3-1-1. Equipment Required ... 3-1
3-1-2. Setting the Factory Mode ... 3-1
RGB V-COM Adjustment ... 3-1
Signal Level Adjustment ... 3-1
3-3-1. SUB-BRIGHT (NTSC) Adjustment ... 3-1
3-3-2. SUB-CONT, HUE and COLOR Adjustment ... 3-1
3-3-2-1. SUB CONT, HUE and COLOR (VIDEO)
Adjustment ... 3-1
3-3-2-2. SUB CONT, HUE and COLOR (Component)
Adjustment ... 3-2
3-3-2-3. SUB CONT, HUE and COLOR (DTV)
Adjustment ... 3-2
3-3-2-4. SUB CONT, HUE and COLOR (15k RGB)
Adjustment ... 3-2
3-3-3. ODD/EVEN Level Adjustment ... 3-3
3-3-4. SAMPLE HOLD 2 Adjustment ... 3-3
3-3-5. RGB High Gain/Bias Adjustment ... 3-3
3-3-5-1. RGB High Gain/Bias Adjustment ... 3-3
3-3-5-2. RGB W/B Low and Custom Adjustment ... 3-4
3-4.
3-5.
VIDEO W/B Adjustment ... 3-4
3-4-1. Component W/B Hight Adjustment ... 3-4
3-4-2. Component W/B Low Adjustment ... 3-4
3-4-3. W/B Low Custom Adjustment ... 3-4
Adjustments in Replacement of Prism and Optical Unit ... 3-5
3-5-1. V-COM Adjustment ... 3-5
3-5-2. Polarization Plate Adujustment ... 3-5
3-5-3. 3D GAMMA Adujustment (Outline) ... 3-5
3-5-4. 3D GAMMA Adujustment ... 3-5
4. Semiconductors
5. Exploded Views
5-1.
5-2.
5-3.
5-4.
Cabinet ... 5-1
Chassis ... 5-2
Base ... 5-3
Optical Unit ... 5-4
6. Electrical Parts List
7. Block Diagrams
Overall ... 7-1
Q ... 7-2
BM ... 7-3
B ... 7-3
C ... 7-4
TH ... 7-5
V ... 7-5
U ... 7-5
NF ... 7-6
NR ... 7-6
H ... 7-6
F ... 7-7
G ... 7-7
GA ... 7-7
8. Diagrams
8-1.
Frame Schematic Diagram ... 8-1
8-2.
Schematic Diagrams and Printed Wiring Boards ... 8-2
Schematic Diagrams
Q (1/6) ... 8-4
Q (2/6) ... 8-5
Q (3/6) ... 8-6
Q (4/6) ... 8-7
Q (5/6) ... 8-8
Q (6/6) ... 8-9
B (1/3) ... 8-12
B (2/3) ... 8-13
B (3/3) ... 8-14
H ... 8-16
NF ... 8-17
NR ... 8-17
TH ... 8-17
U ... 8-17
V ... 8-17
C (1/9) ... 8-20
C (2/9) ... 8-21
C (3/9) ... 8-22
C (4/9) ... 8-23
C (5/9) ... 8-24
C (6/9) ... 8-25
C (7/9) ... 8-26
C (8/9) ... 8-27
C (9/9) ... 8-28
BM ... 8-31
F ... 8-33
G (1/3) ... 8-33
G (2/3) ... 8-34
G (3/3) ... 8-35
GA ... 8-36
Printed Wiring Boards
Q ... 8-3
B ... 8-11
H ... 8-15
NF ... 8-17
NR ... 8-17
TH ... 8-17
U ... 8-17
V ... 8-17
C ... 8-18, 19
BM ... 8-30
F ... 8-32
G ... 8-32
GA ... 8-36
Add Comment
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.
Comments