Philips PM 2813 Fonte de alimentação
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Philips PM 2813 you can upload the files here .
Model:
PM 2813
Date:
1992
Category:
Group:
Description:
Programmable Power Supply
Manual type:
Manual de serviço
Pages:
28
Size:
1.35 Mbytes (1417285 Bytes)
Language:
english
Revision:
Manual-ID:
4822 872 80169 and/or 920305
Date:
Quality:
Scaned documento, todas legível.
Upload date:
21 November 2008
MD5:
00b780e20f2b29a5641b6317e3ef07d8
Downloads:
6295
Information
Info only for the Programming Card
Manual type:
Manual de serviço
Pages:
66
Size:
17.16 Mbytes (17988714 Bytes)
Language:
english
Revision:
Manual-ID:
4822 872 85004
Date:
01 December 1991
Quality:
Scaned documento, todas legível.
Upload date:
31 July 2020
MD5:
02436219453c5e5318fcd4d1233de850
Downloads:
1502
Information
1 SAFETY INSTRUCTIONS ... 1-1
1.1 INTRODUCTION ... 1-1
1.2 SAFETY PRECAUTIONS ... 1-1
1.3 CAUTION AND WARNING STATEMENTS ... 1-1
1.4 SYMBOLS ... 1-1
1.5 IMPAIRED SAFETY ... 1-2
1.6 GENERAL SAFETY INFORMATION ... 1-2
2 GENERAL INFORMATION ... 2-1
2.1 CHARACTERISTICS ... 2-1
2.1.1 Performance Characteristics ... 2-1
2.1.2 Environmental Characteristics ... 2-1
2.1.3 Mechanical requirements ... 2-1
2.1.4 Instrument performance ... 2-2
2.1.4.1 Output channel 30V/10A/60W performance ... 2-2
2.1.4.2 Output channel 60V/5A/60Wperformance ... 2-4
2.1.4.3 Output channel 60V/10AJ120Wperformance ... 2-5
2.1.5 Safety characteristics ... 2-7
2.1.6 Dimensions and weight ... 2-8
2.1.7 Mains Supply Conditions ... 2-8
2.2 INTERFERENCES ... 2-8
2.2.1 Electromagnetic interference ... 2-8
2.2.2 Frequency interference ... 2-8
3 CIRCUIT DESCRIPTIONS ... 3-1
3.1 DESCRIPTION OF EACH CIRCUIT SECTION ... 3-1
3.1.1 CPU PCB, unit A1 ... 3-1
3.1.2 DISPLAY KEYBOARD PCB, unit A2 ... 3-5
3.1.3 AD-DA PCB, unit A3 ... 3-5
3.1.4 Output on the front panel ... 3-9
3.1.5 Input module ... 3-10
3.1.5.1 Setting the power voltage ... 3-10
4 PERFORMANCE VERIFICATION PROCEDURES ... 4-1
4.1 GENERAL INFORMATION ... 4-1
4.2 RECOMMENDED TEST EQUIPMENT ... 4-1
5 DISASSEMBLING THE INSTRUMENT ... 5-1
5.1 GENERAL INFORMATION ... 5-1
5.2 REMOVING THE COVER ... 5-1
5.3 DISASSEMBLING THE INSTRUMENT ... 5-1
5.4 REASSEMBLING THE INSTRUMENT ... 5-2
6 CALIBRATION ADJUSTMENT PROCEDURE ... 6-1
6.1 GENERAL INFORMATION ... 6-1
6.1.1 Recommended test equipment for local calibration ... 6-1
6.1.2 Recommended test equipment for remote calibration ... 6-1
6.2 CALIBRATION PROCEDURES ... 6-1
6.2.1 Local calibration procedure ... 6-1
6.2.2 Remote calibration procedure ... 6-4
7 CORRECTIVE MAINTENANCE PROCEDURES ... 7-1
7.1 HARDWARE-ERROR MESSAGES ... 7-1
7.2 TROUBLESHOOTING ... 7-2
7.2.1 Introduction ... 7-2
7.2.2 CPU PCB ... 7-2
7.2.3 AD-DA PCB ... 7-3
7.3 REPLACEMENTS ... 7-3
7.3.1 Standard parts ... 7-3
7.3.2 Special parts ... 7-4
7.3.3 Transistors and integrated circuits ... 7-4
7.4 RECALIBRATION AFTER REPAIR ... 7-4
7.5 INSTRUMENT REPACKING ... 7-4
8 SAFETY INSPECTION AND TESTS AFTER REPAIR AND MAINTENANCE IN THE PRIMARY CIRCUIT ... 8-1
8.1 GENERAL DIRECTIONS ... 8-1
8.2 SAFETY COMPONENTS ... 8-1
8.3 CHECKING PROTECTIVE GROUND ... 8-1
8.4 CHECKING INSULATION RESISTANCE ... 8-1
8.5 CHECKING LEAKAGE CURRENT ... 8-1
8.6 VOLTAGE TEST ... 8-1
9 PARTS LIST ... 9-1
10 WIRING DIAGRAM 10-1
Add Comment
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.
Comments