Icom RD-200 Receptor GPS
Manufacturer:
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
If you have any other photos or manuals for the
Icom RD-200 you can upload the files here .
Model:
RD-200
Date:
1999
Category:
Group:
Description:
Information
1-2 RD-200
‘ GENERAL
• Frequency coverage : 283.5 kHz to 325.0 kHz
• Type of emmision : 1K0F2B
• Antenna impedance : 50 Ω nominal
• Intermediate frequency : 455 kHz
• Usable temperature range : –20°C to +70°C; –4°F to +158°F
• Power Supply requirement : 12 V DC nominal negative ground
• Current drain (at 12 V DC) : Less than 0.2 A
• Dimensions (projections not included) : 140(d)×157.2(H) mm; 51⁄2(d)×63⁄16(H) in
• Weight : 1.0 kg; 2 lb 3 oz
‘ Receiver
• Intermediate frequency : 455 kHz
• Sensitivity : 0.2 μV at 12 dB SINAD
• Sprious response : 60 dB
• Intermodulation : 50 dB
Manual type:
Manual de serviço
Pages:
48
Size:
2.85 Mbytes (2983897 Bytes)
Language:
english
Revision:
Manual-ID:
S-13602II-CD
Date:
Quality:
Documento eletrônico, digitalização, bem legível.
Upload date:
17 June 2012
MD5:
8d256c7215e6442e7df734bb5105d903
Downloads:
1410
Information
This service manual describes the latest service information
for the FP-561 MARINE PLOTTER/SOUNDER and RD-200
DGPS BEACON Receiver at the time of publication.
SECTION 1 SPECIFICATIONS
1-1 FP-561 ... .1-1
1-2 RD-200 ... .1-2
SECTION 2 INSIDE VIEWS
2-1 FP-561 ... .2-1
2-2 RD-200 ... .2-2
SECTION 3 CIRCUIT DESCRIPTION
3-1 Transmitter CIRCUITS ... .3-1
3-2 Receiver CIRCUITS ... .3-1
3-3 REGULATOR CIRCUITS ... .3-2
3-4 INTERFACE CIRCUITS ... .3-3
3-5 LOGIC CIRCUITS ... .3-3
3-6 DGPS Receiver ... .3-4
3-7 PORT ALLOCATIONS ... .3-5
SECTION 4 ADJUSTMENT PROCEDURES
4-1 PREPARATION ... .4-1
4-2 FP-561 Transmitter ADJUSTMENT ... .4-2
4-3 FP-561 Receiver ADJUSTMENT ... .4-2
4-4 FP-561 WATER TEMPERTUREM ADJUSTMENT ... .4-2
4-5 RD-200 ADJUSTMENTS ... .4-4
SECTION 5 PARTS LIST
SECTION 6 MECHANICAL PARTS AND DISASSEMBLY
SECTION 7 SEMI-CONDUCTOR INFORMATION
SECTION 8 BOARD LAYOUTS
8-1 FP-561
8-1-1 SW UNIT ... .8-1
8-1-2 LOGIC UNIT ... .8-3
8-1-3 MAIN UNIT ... .8-5
8-2 RD-200
8-2-1 MAIN UNIT ... .8-7
8-2-2 ANT UNIT ... .8-9
SECTION 9 BLOCK DIAGRAM
9-1 FP-561 ... .9-1
9-2 RD-200 ... .9-2
SECTION 10 VOLTAGE DIAGRAM
10-1 FP-561 ... .10-1
10-2 RD-200 ... .10-3
Add Comment
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.
Comments