Fluke 8846A Multímetro digital
Fabricante:
Modelo:
8846A
Data:
2007
Categoria:
Grupo:
Descrição:
6.5 Digit Precision Multimeter

Informação

The 8845A and 8846A are 6-1/2 digit, dual-display multimeters designed for bench-top, field service, and system applications. Their full complement of measurement functions plus its RS-232, IEEE 488, and Ethernet Remote Interfaces makes these multimeters ideal candidates for precision manual measurements and use in automated systems. For portability, these multimeters include a carrying handle that also serves as a bail for bench top operation. There are a few additional features in the 8846A that are not present in the 8845A, These features will be identified with the annotation of “8846A Only” by each feature that is found only in that model. Separate specification tables are also used to clarify the differences between these two models. The following is a list of some of the features and functions: • Bright, large-digit, wide-viewing-angle display • Dual display for displaying two properties of an input signal (e.g., ac voltage in one display and frequency in the other). • Remote operation via IEEE 488, RS-232, and Ethernet Interface. • Trigger in and measurement-complete out • Front panel USB port for optional memory /8846A Only) • 6-1/2 digit resolution • Half-rack width • True rms ac • 2 and 4-wire resistance measurements • Extended 10 Ω and 1 GΩ ranges /8846A Only) • Frequency measurements to 300 kHz /8846A to 1 MHz) • Capacitance measurements /8846A Only) • Temperature measurement /8846A Only) • 10 A current capability • Decibels (dB and dBm) with variable reference impedance and audio power measurement capability • Input terminals on both front and rear panels of the meter • Closed-case calibration (no internal calibration adjustments)

mostrar mais

folha de dados
Tipo de manual:
folha de dados
Páginas:
4
Tamanho:
4.98 Mbytes (5218210 Bytes)
Idioma:
english
Revisão:
ID de manual:
Data:
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
28 Janeiro 2016
MD5:
17898bb279418c66ce720ced70cb871d
Downloads:
1159
Manual do Usuário
Tipo de manual:
Manual do Usuário
Páginas:
118
Tamanho:
1.62 Mbytes (1700143 Bytes)
Idioma:
english
Revisão:
1
ID de manual:
Data:
01 Novembro 2007
Qualidade:
Documento eletrônico, digitalização, bem legível.
Data de upload:
14 Janeiro 2018
MD5:
9508daed83095e6e17b83f7bf5ca4178
Downloads:
893

Informação

Calibration Manual Organization of the Calibration Manual This calibration manual is divided into the following chapters: Chapter 1 – Introduction and Specifications This chapter introduces the Fluke 8845A and 8846A Digital Multimeters, describing their features, and Accessories. This chapter also discusses use of the Calibration Manual and the various conventions used in describing the meter’s circuitry and presents a complete set of specifications. Chapter 2 – General Maintenance Chapter 2 provides maintenance information covering handling, cleaning, and fuse replacement. Access and reassembly procedures are also explained in this chapter. Chapter 3 – Performance Test and Calibration This chapter provides performance verification procedures related to the specifications presented in Chapter 1. To maintain these specifications, a full adjustment/calibration procedure is also presented. Chapter 4 – List of Replaceable Parts Chapter 4 includes parts lists for all standard assemblies and information on how and where to order parts. Operating Instructions Full operating instructions are provided in the Fluke 8845A/8846A Users Manual. Reference to these instructions may be necessary during some of the maintenance and repair procedures presented in this Calibration Manual. Accessories Table 1-3 lists the available Accessories for the 8845A and 8846A.

mostrar mais

Comments

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image