Alliance T-10 Antena
Imagem 1 de 3
Imagem 2 de 3
Imagem 3 de 3
Se você tem outras fotos ou manuais para os
Alliance T-10 você pode carregar os arquivos aqui .
The Alliance Tenna-Rotor® consists of two units: the rotor unit, which mounts on the mast below the Antenna, and the control box, which is placed on or about the TV receiver. These are interconnected by a four- or five-conductor cable. The theory of operation concerns two separate circuits. The first is the power circuit, which in all Tenna-Rotors® transmits the power that actuates the motor and rotates the Antenna. The second is the indicator or signal circuit, which reports the rotor’s progress back to the control box. In the K-22 the signal circuit turns on the panel light when the rotor reaches the stop or end of rotation. In the T-10 T-12 T-20 and T-45 the signal circuit registers the Antenna direction on the control box indicator. The signal circuit in the U-83 U-98 and U-100 actuates the escapement assemblies, causing the rotor to turn to the desired position automatically. The Model C-225 is an automatic, transistorized unit using a unique patented Phase-sensing unit. The use of this bridge circuit results in extreme accuracy, quiet operation of control, and constant synchronization. Rotation is attained from a reversible, capacitor-type 24 volt, AC motor and is limited by mechanical stops within the rotor housing. The U-83 U-98 and U-100 controls are protected by a thermostat within the rotor or control assembly. The Alliance Tenna-Rotor® Models K-22 T-12 and U-98 produced after June 1, 1958, have been changed from a speed of 2 RPM to a speed of 1 RPM. This change makes possible better orientation for “color” and “black and white” television reception, improves torque, braking, and general overall performance. Kits are available to convert the T-10 U-83 K-22 T-12, and U-98 rotors manufactured before June 1, 1958, to 1 RPM.
Tipo de manual:
Manual de serviço
14.17 Mbytes (14861430 Bytes)
ID de manual:
Scaned documento, todas legível.
Data de upload:
2013 03 16
CHAPTER I ... ... Tenna-Rotors in General ... 1 Installation and Service Hints ... 1 Interchangeability of Alliance Tenna-Rotors ... 2 Wire Charts ... 2 Wire Chart for Extra Long Runs of Cable ... 2 Use of 2 or more Controls on One Rotor ... 2 CHAPTER I! ... MODEL T-10 General Information ... 3 Servicing Procedure ... 3 Trouble Shooting ... 4 Parts List ... 5 CHAPTER 111 ... MODEL U-83 General Information ... 7 Servicing Procedure ... 7 Trouble Shooting ... 7 Adjustment Instructions ... 8 Parts List ... 11 CHAPTER IV ... MODEL K-22 General Information ... 13 Service Procedure ... 13 Trouble Shooting ... 14 Parts List ... 15 Model K-22A Tenna-Rotor ... 15 CHAPTER V ... MODEL T-12 General Information ... 17 Service Procedure ... 17 Trouble Shooting ... 18 Adjustment Instructions ... 18 Parts List ... 19 CHAPTER VI ... MODEL U-98 General Information ... 21 Service Procedure ... 21 Trouble Shooting ... 22 Parts List ... 23 CHAPTER VII ... MODEL T-20 General Information ... 25 Servicing Procedure ... 26 Trouble Shooting ... 27 Adjustment Instructions ... 27 Parts List ... 28 CHAPTER VIII ... MODEL U-100 General Information ... 29 Servicing Procedure ... 29 Voltage Chart ... 30 Trouble Shooting ... 32 Parts List ... 32 Change Notice ... 32 CHAPTER IX ... MODEL T-45 General Information ... 33 Servicing Procedure ... 33 Resistance Check Chart (Rotor) ... 34 Resistance Check Chart (Control Box) ... 34 Trouble Shooting ... 35 Adjustment Instructions ... 35 Parts List ... 37 CHAPTER X ... MODEL C-225 General Information ... 39 Circuit Description ... 39 Servicing Procedure ... 40 Resistance Check Chart (Rotor) ... 42 Control Box Resistance Check ... 42 Trouble Shooting ... 42 Parts List ... 43 CHAPTER XI ... MODEL C-225A General Information ... 45 Circuit Description ... 45 Servicing Procedure ... 46 Control Box Resistance Check ... 47 Trouble Shooting ... 47 Parts List ... 48
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.