Xerox DocuColor 3535 Drukarka
Manufacturer:
Model:
DocuColor 3535
Date:
2003
Category:
Group:
Description:
Instrukcja serwisowa
Manual type:
Instrukcja serwisowa
Pages:
1480
Size:
51.30 Mbytes (53789805 Bytes)
Language:
english
Revision:
Manual-ID:
701P40660
Date:
01 September 2003
Quality:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Upload date:
11 May 2020
MD5:
8cdd6bf24a70a99e85086ffa3a426f43
Downloads:
2377

Information

This Service Manual is divided into seven sections. The titles of the sections and a description of the information contained in each section are contained in the following paragraphs: Section 1: Service Call Procedures This section contains procedures that determine what actions are to be taken during a service call on the machine and in what sequence they are to be completed. This is the entry level for all service calls. Section 2: Status Indicator RAPs This section contains the diagnostic aids for troubleshooting the Fault Code and non-Fault Code related faults (with the exception of image quality problems). Section 3: Image Quality This section contains the diagnostic aids for troubleshooting any image quality problems, as well as image quality specifications and image defect samples. Section 4: Repairs/Adjustments This section contains all the Adjustments and Repair procedures. Repairs Repairs include procedures for removal and replacement of parts which have the following special conditions: When there is a personnel or machine safety issue. When removal or replacement cannot be determined from the exploded view of the Parts List. When there is a cleaning or a lubricating activity associated with the procedure. When the part requires an adjustment after replacement. When a special tool is required for removal or replacement. Use the repair procedures for the correct order of removal and replacement, for warnings, cau- tions, and notes. Adjustments Adjustments include procedures for adjusting the parts that must be within specification for the correct operation of the system. Use the adjustment procedures for the correct sequence of operation for specifications, warn- ings, cautions and notes. Section 5: Parts Lists This section contains the Copier/Printer Parts List. Section 6: General Procedures/Information This section contains General Procedures, Diagnostic Programs, and Copier/Printer Informa- tion. Section 7: Wiring Data This section contains drawings, lists of plug/jack locations, and diagrams of the power distribu- tion wire networks in the machine. Individual wire networks are shown in the Circuit Diagrams contained in Section 2. This section also contains the Block Schematic Diagrams. Section 9: Installation This section contains installation information for various machine components.

show more

Komentarze

Brak komentarzy, bądź pierwszy!

Dodaj Komentarz

* Wymagane
1000
Captcha