Thurlby Thandar Instruments TTI 1705 Multimetr cyfrowy
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Thurlby Thandar Instruments TTI 1705 ?
Jeśli masz jakieś inne podręczniki dla
Thurlby Thandar Instruments TTI 1705, możesz przesłać pliki tutaj .
Model:
1705
Data:
2009
Kategoria:
Grupa:
Opis:
PROGRAMMABLE TRUE RMS MULTIMETER
Informacja
This programmable true RMS multimeter has dual measurement capability and a dual display † which can show either two independent measurements, a measurement together with its range or a measurement with one of the many calculated functions available.
The key features are:
• Large, high contrast, liquid crystal dual display.
• 0.04% basic accuracy, 12000 counts.
• Manual or autoranging.
• DC and AC Volts, DC and AC current, Resistance, Capacitance, and Frequency measurement; Continuity and Diode checks.
• True RMS AC and AC+DC measurement.
• Display nulling and Ohms null.
• Touch hold mode - holds onto a stable reading until updated.
• 100 point data logger.
• Measurement post-processing to give:
dB and power measurement with settable reference impedance
percentage deviation from a user-entered reference
linear scaling with offset
limits comparison for go/no go testing
automatic storage of minimum and maximum readings.
• Remote control via addressable RS232 (standard) or GPIB (factory-fit option) interfaces.
• Closed case Software calibration.
• Fully compliant with EN61010-1 Safety and EN61326 EMC standards.
† Licensed under U.S. Pat. 4,825,392
2
Typ ręczny:
Instrukcja obsługi
Strony:
46
Rozmiar:
890.24 Kbytes (911602 Bytes)
Język:
french
Rewizja:
Issue 3
Ręczny ID:
48581-1161
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2013 11 03
MD5:
13a49d3a9c7fd90d3a67beafdd3c6da6
Pobrane:
857
Informacja
Introduction 2
Spécifications 3
Sécurité 9
CEM 11
Installation 12
Exploitation générale 14
Exécution des mesures de base 18
Mode de mesure double 21
Fonctions évoluées 23
Acquisition des données et impression 27
Etalonnage 29
Maintenance 30
Commande a distance 31
Commandes à distance 37
Réglages par défaut 44
1
Typ ręczny:
Instrukcja obsługi
Strony:
46
Rozmiar:
355.49 Kbytes (364018 Bytes)
Język:
french
Rewizja:
Issue 4
Ręczny ID:
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2015 05 08
MD5:
22f150002536e0007e9209ce89f5e78a
Pobrane:
468
Informacja
Introduction 2
Spécifications 3
Sécurité 9
CEM 11
Installation 12
Exploitation générale 14
Exécution des mesures de base 18
Mode de mesure double 21
Fonctions évoluées 23
Acquisition des données et impression 27
Etalonnage 29
Maintenance 30
Commande a distance 31
Commandes à distance 37
Réglages par défaut 44
Typ ręczny:
Instrukcja obsługi
Strony:
43
Rozmiar:
896.44 Kbytes (917959 Bytes)
Język:
english
Rewizja:
Issue 9
Ręczny ID:
48581-1160
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2013 11 02
MD5:
50fb8d877ac4ac347b8035b08726c34d
Pobrane:
578
Informacja
Introduction 2
Specifications 3
Safety 8
EMC 9
Installation 10
General Operation 12
Making Basic Measurements 16
Dual Measurement Mode 19
Advanced Features 21
Data Logging and Printing 25
Calibration 27
Maintenance 28
Remote Operation 29
Remote Commands 34
General Commands 34
Main Display Commands 35
Dual Measurement Mode Commands 37
First Level Modifier Commands 37
Second Level Modifier Commands 38
Data Logging Commands 40
Calibration Commands 40
Default Settings 41
1
Typ ręczny:
Instrukcja obsługi
Strony:
43
Rozmiar:
359.75 Kbytes (368380 Bytes)
Język:
english
Rewizja:
Issue 10
Ręczny ID:
48581-1160
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2013 11 03
MD5:
b611b44aeebbf3fb20f59e62dd82716e
Pobrane:
606
Informacja
Introduction 2
Specifications 3
Safety 8
EMC 9
Installation 10
General Operation 12
Making Basic Measurements 16
Dual Measurement Mode 19
Advanced Features 21
Data Logging and Printing 25
Calibration 27
Maintenance 28
Remote Operation 29
Remote Commands 34
General Commands 34
Main Display Commands 35
Dual Measurement Mode Commands 37
First Level Modifier Commands 37
Second Level Modifier Commands 38
Data Logging Commands 40
Calibration Commands 40
Default Settings 41