Telecommunications Techniques Corporation Fireberd 4000 Network Analyzer
Producent:
Model:
Fireberd 4000
Data:
1991
Kategoria:
Grupa:
Opis:
Informacja
The Fireberd 4000 (Figure 1-1) is an instrument that uses internal and modular interfaces to test the quality of digital communications networks and equipment. It provides the analysis capabilities to isolate circuit malfunctions and report the results on the front panel or on a printout. Highly versatile, the Fireberd 4000 is used in locations such as central offices, technical control centers, end-user sites, engineering laboratories, and earth stations. 1.2.1 Features The Fireberd 4000 offers these key features and characteristics: • Operates on circuits transmitting and receiving data from 50 b/s to 15 Mb/s. • Complete error analysis with bit, block, BPV, code, character, and frame or CRC errors measured simultaneously. • Set-up panel and display that permits configuration of the unit for any test from the front-panel. • Synchronous and asynchronous testing via internal EIA RS-232-C and MIL-STD-188C interfaces. • CCITT V.35, EIA RS-449, DDS, Tl, G.704, and G.703 testing via modular interfaces installed in the FIREBERD 4000’s rear panel. • Thirteen fixed clock frequencies ranging from 300 Hz to 2048 kHz. ® Generates six fixed data patterns: MARK only, SPACE only, 1:1, 1:7, and 3IN24, 1004Hz. ® Generates seven pseudorandom data patterns: 63, 511, 2047, 2lM, 220-1, 223-l, and QRSS. • Generates user-programmable patterns that include: a synchronous 3- to 24-bit binary test pattern and three asynchronous (three synchronous with Option 4006) 1- to 2000-character hexadecimal test patterns for acceptance testing, stress testing, or simulating live data. • Generates standard FOX message in four asynchronous (one synchronous with Option 4006) character formats: Baudot, BCDIC, ASCII, and EBCDIC. • RS-232 printer/remote controller Interface provides access for an external printer for printing test results and unit configurations, or computer-controlled operation for unattended testing from a remote site. • Dual results displays which show any two test measurements at the same time. • Summary test results category that displays key nonzero and “out-of-spec” measurements, eliminating the need to search through long lists of test results. • Histogram analysis displayed in either a graph or list provides a perspective as to how selected results change with time.

pokaż więcej

Instrukcja obsługi
Typ ręczny:
Instrukcja obsługi
Strony:
170
Rozmiar:
6.76 Mbytes (7084710 Bytes)
Język:
english
Rewizja:
B
Ręczny ID:
ML11063
Data:
01 luty 1991
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
09 styczeń 2017
MD5:
19a759543a91918b2f8f29011ccd83b2
Pobrane:
296
Informacja
1.0 GENERAL INFORMATION ... 1-1 1.1 INTRODUCTION ... 1-1 1.2 INSTRUMENT OVERVIEW ... 1-1 1.3 OPERATING MODES ... 1-3 2.0 PREPARATION FOR USE ... 2-1 2.1 INTRODUCTION ... 2-1 2.2 UNPACKING AND INITIAL INSPECTION ... 2-1 2.3 INSTRUMENT IDENTIFICATION ... 2-1 2.4 EQUIPMENT INCLUDED ... 2-1 2.5 WARNINGS ... 2-1 2.6 POWER REQUIREMENTS ... 2-2 2.7 INSTRUMENT CHECKOUT ... 2-4 3.0 INSTRUMENT DESCRIPTION ... 3-1 3.1 INTRODUCTION ... 3-1 3.2 PHYSICAL DESCRIPTION ... 3-1 3.3 FRONT PANEL CONTROLS AND INDICATORS ... 3-1 3.4 Fireberd 4000 REAR PANEL ... 3-6 4.0 OPERATING INSTRUCTIONS ... 4-1 4.1 INTRODUCTION ... 4-1 4.2 CONFIGURING THE FIREBERD 4000 ... 4-1 4.3 STEPPING THROUGH THE SETUP MENUS ... 4-1 4.4 Interface SETUP CATEGORY ... 4-6 4.5 Generator CLOCK SETUP CATEGORY ... 4-6 4.6 PATTERN SETUP CATEGORY ... 4-12 4.7 SETUP SUMMARY DISPLAY ... 4-19 4.8 RECALL/STORE CATEGORY ... 4-19 4.9 AUXILIARY SETUP CATEGORY ... 4-21 4.10 CONTENTION CONDITIONS ... 4-28 4.11 OPERATING IN SELF LOOP MODE ... 4-28 4.12 Fireberd 4000 ANALYSIS RESULTS ... 4-29 5.0 DATA INTERFACES ... 5-1 5.1 INTRODUCTION ... 5-1 5.2 OVERVIEW ... 5-1 5.3 INTERNAL RS-232 AND MIL188 DATA INTERFACES ... 5-4 5.4 ISU-6000 Interface SWITCHING UNIT ... 5-12 6.0 PRINTER OPERATION ... 6-1 6.1 INTRODUCTION ... 6-1 6.2 GETTING STARTED ... 6-1 6.3 PRINTER CONTROL PANEL ... 6-1 6.4 AUXILIARY SETUP PRINTER MENUS ... 6-2 6.5 THE PR-45 THERMAL PRINTER ... 6-6 6.6 Fireberd 4000 PRINTER INTERFACES ... 6-8 7.0 REMOTE CONTROL ... 7-1 7.1 INTRODUCTION ... 7-1 7.2 RS-232-C REMOTE CONTROL OPERATION ... 7-1 7.3 IEEE-488 REMOTE CONTROL OPERATION ... 7-5 7.4 REMOTE CONTROL COMMANDS ... 7-7 7.5 ENTERING LONG USER PATTERNS FROM A REMOTE DEVICE ... 7-12 8.0 SPECIFICATIONS ... 8-1 8.1 INTRODUCTION ... 8-1 8.2 OPERATING MODES ... 8-1 8.3 GENERATOR ... 8-1 8.4 RECEIVER ... 8-2 8.5 PROGRAMMABILITY ... 8-3 8.6 NON-VOLATILE MEMORY ... 8-4 8.7 REMOTE CONTROL CAPABILITY ... 8-4 8.8 DATA INTERFACES ... 8-4 8.9 REAL TIME CLOCK ... 8-5 8.10 DISPLAY ... 8-5 8.11 AUDIO OUTPUT ... 8-6 8.12 POWER REQUIREMENTS ... 8-6 8.13 ENVIRONMENTAL SPECIFICATIONS ... 8-6 8.14 DIMENSIONS AND WEIGHT ... 8-6 9.0 OPTIONS AND Accessories ... 9-1 9.1 INTRODUCTION ... 9-1 9.2 OPTIONS ... 9-1 9.3 ACCESSORIES ... 9-1 10.0 MAINTENANCE AND SERVICE ... 10-1 10.1 INTRODUCTION ... 10-1 10.2 MAINTENANCE ... 10-1 10.3 SERVICE ... 10-3 APPENDICES APPENDIX A HEXADECIMAL CONVERSION TABLE ... A-1 APPENDIX B ANALYSIS RESULTS BY DATA INTERFACE ... B-1 APPENDIX C ANALYSIS RESULTS DEFINITION ... C-1 APPENDIX D MAINFRAME STATUS AND ERROR MESSAGES ... D-1 APPENDIX E Fireberd 4000 FACTORY DEFAULTS ... E-1 APPENDIX F OPTION 4004, CCITT G.821 PERFORMANCE ANALYSIS DISCUSSION ... F-1

pokaż więcej

Komentarze (0)

Brak komentarzy, bądź pierwszy!

Dodaj Komentarz

* Wymagane
1000
Captcha