Keithley 414S Multimetr analogowy
Producent:
Model:
414S
Data:
1977
Kategoria:
Grupa:
Opis:
Picoammeter

Informacja

The Keithley Model 414S is a completely solid- state pcioammeter which measures currents over 17 ranges from 10-² to 10-¹⁰ ampere full scale. Accuracy is +2% of full scale on the 10-² to 10-⁸ ampere ranges and +4% of full scale on the 3 x 10-⁹ to 10-¹⁰ ampere ranges. A unique circuit provides complete overload protection for Model 414S without compromising the outstanding features of the MOS FET input. The Picoam-meter will withstand transient overloads up to 1000 volts without damage, and overload recovery is almost instantaneous. The Picoammeter employs matched MOS FET transistors in the input followed by a differential Amplifier stage, a transistor driver and a transistor output stage. Negative feedback is used for stability and accuracy. Fast warm-up is an inherent characteristic of the Picoammeter, It can be used almost immediately on its most sensitive range. For maximum stability, however, about 10 minutes warm-up time should be allowed. The time and temperature stability of the 414S Picoammeter is unmatched by any other inexpensive pico-ammeter. The Model 414S will operate for days without requiring rezeroing. Zero drift with time is less than 0.5% of full scale per week. Temperature drift is equally small - a change of 10°C affects the reading less than 0.5% of full scale on the most sensitive range. One volt or 1 milliampere at full-scale deflection on all ranges is provided to drive chart recorders. The 1 milliampere recorder output will drive the Keithley 370 Recorder directly. When potentiometric recorders are used, the output voltage can be conveniently divided by a shunt resistor and adjusted for full scale with the rear panel Calibration potentiometer.

pokaż więcej

Serwis i User Manual
Typ ręczny:
Serwis i User Manual
Strony:
32
Rozmiar:
1.90 Mbytes (1995672 Bytes)
Język:
english
Rewizja:
B
Ręczny ID:
Data:
1978 05 01
Jakość:
Skanowany dokument, czytając częściowo źle, nie częściowo czytelny.
Data przesłania:
2020 07 24
MD5:
fbdd2d5b4e793d6cadb80115f6b0cdde
Pobrane:
328

Informacja

ILLUSTRATIONS ... iii SPECIFICATIONS ... iv 1. GENERAL DESCRIPTION ... 1 2. OPERATION ... 4 3. CIRCUIT DESCRIPTION ... 6 4. SERVICING ... 8 5. CALIBRATION ... 10 6. ACCESSORIES ... 16 7. REPLACEABLE PARTS ... 19 SCHEMATICS ... 27

pokaż więcej