Advantest Corporation Q8384 Analizator widma
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Advantest Corporation Q8384 ?
Jeśli masz jakieś inne podręczniki dla
Advantest Corporation Q8384, możesz przesłać pliki tutaj .
Model:
Q8384
Data:
1999
Kategoria:
Grupa:
Opis:
Optical Spectrum Analyzer
Informacja
The Q8384 is an optical spectrum Analyzer of the spread
spectral method using the di ffraction grating mono
chromator.
The features of the optical spectrum Analyzer are as follows:
( 1 )
(2)
Performance compii ant with optical communication devices
such as EDF A, AW G and the fiber grat
ing.
• Wavelength resolution: 10 pm or higher
• Wide dynamic range: 60 dB or more
• High wavelength accuracy: ±20 pm
• Polarization dependency:
±0.05 dB
WDM analysis function
Using the EDFA analysis function (with WDM) and the
relationships between wavelengths and lev
els are easily observed by displaying a list of wavelengths.
(3)
Optical connectors that can be replaced by the user
Users can easily replace optical connector types FC, SC and ST.
(4)
Operability and a large-size color LCD
Measurements are taken easier than earlier models by use of
operability-minded panel key arrange
ment and soft menus. In addition, the display is now of an
8.4-inch high-intensity TFT color LCD
to offer you more visibility.
(5)
Printer output
A high-speed thermo-sensitive printer is equipped as
standard to output the screen data. Further
more, the optical spectrum Analyzer is equipped with a port
which is used for a printer format ESC/
P, ESC/P-R or PCL.
(6)
3.5-inch floppy disk drive
This drive is used to save measurement data and set
conditions. The measurement data is saved in
text format. This data, however, can be saved in bitmap
format as screen image so that you can ana
lyze it or make reports on an external computer.
Typ ręczny:
Instrukcja obsługi
Strony:
266
Rozmiar:
8.47 Mbytes (8880899 Bytes)
Język:
english
Rewizja:
Ręczny ID:
FOE-8335041EOO
Data:
1999 07 30
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2016 08 10
MD5:
183db448cec740bf48a6a3358b6387ab
Pobrane:
653
Informacja
1
INTRODUCTION
...
1-1
1.1 Product O verview
...
1.2 Accessories, Option and Limited-life Part
...
1.2.1 Standard Accessories
...
1.2.2 Option and Accessories
...
1.2.3 Limited-life P a
rt ...
1.3 Operating Environment
...
1.3.1 Environmental Conditions
...
1.3.2 Power Requirements
...
1.3.3 Power F u se
...
1.3.4 Power C ab
le ...
1.4 System Checkout
...
1.5 Setting the Print Paper
...
1.6 Cleaning, Storing and Transporting the Q8384 Optical
Spectrum Analyzer ...
1.6.1
Cleaning
...
1.6.2
Storing ...
1.6.3 Replacing and Cleaning the Optic al-Connector Adapter
of Q8384 ...
1.6.4
Transporting ...
1.7 Warm-up tim e
...
1.8 About Calibration
...
1-1
1-2
1-2
1-2
1-2
1-4
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-10
1-10
1-11
1-13
1-13
1-13
2
O P E R A T IO N
...
2-1
2.1 Panel
Description ...
2.1.1 Front Panel
...
2.1.1.1 LCD Display Section
...
2.1.1.2 FUNCTION Section
...
2.1.1.3 CURSOR Section
...
2.1.1.4 MEASURE Section
...
2.1.1.5 DATA Section
...
2.1.1.6 DISPLAY
Section ...
2.1.1.7 DATA OUT Section
...
2.1.1.8 GP-ТВ Section
...
2.1.1.9 Connector
Section ...
2.1.1.10 POWER Switch/Floppy Disk Drive Section
...
2.1.2 Screen
Annotation ...
2.1.3 Rear P a n e
l ...
2.2 Basic Operation
...
2.2.1 Operating Menus and Entering Data
...
2.2.2 Light Spectrum
Measurement ...
2.2.3 Peak Power Monitor
Measurement ...
2.2.4 Alignment
...
Typ ręczny:
Instrukcja obsługi
Strony:
230
Rozmiar:
9.49 Mbytes (9951963 Bytes)
Język:
english
Rewizja:
Ręczny ID:
FOE-8335041D00
Data:
1999 07 30
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2016 08 10
MD5:
72e4a8eea483c50530dedca852994be2
Pobrane:
571
Informacja
1
INTRODUCTION
...
1-1
1.1 Product
Overview ...
1.2 Accessories, Option and Limited-life Part
...
1.2.1 Standard Accessories ...
...
1.2.2 Option and Accessories
...
1.2.3 Limited-life P a
rt ...
1.3 Operating Environment
...
...
1.3.1 Environmental Conditions
...
1.3.2 Power Requirements ...
...
1.3.3 Power F u
se ...
1.3.4 Power C
able ...
1.4 System
Checkout ...
1.5 Setting the Print Paper
...
1.6 Cleaning, Storing and Transporting the Q8384 Optical
Spectrum Analyzer ...
1.6.1 Cleaning
...
...
1.6.2 Storing ...
...
1.6.3 Replacing and Cleaning the Optical-Connector Adapter
of Q8384 ...
1.6.4
Transporting ...
1.7 Warm-up tim e
...
1.8 About Calibration
...
O P E R A T IO N
...
2-1
2.1 Panel
Description ...
2.1.1 Front P an
el ...
2.1.1.1 LCD Display Section
...
2.1.1.2 FUNCTION Section
...
2.1.1.3 CURSOR Section
...
2.1.1.4 MEASURE Section
...
2.1.1.5 DATA Section
...
2.1.1.6 DISPLAY
Section ...
...
2.1.1.7 DATA OUT Section
...
2.1.1.8 GP-IB Section
...
2.1.1.9 Connector Section
...
2.1.1.10 POWER Switch/Floppy Disk Drive Section
...
2.1.2 Screen
Annotation ...
2.1.3 Rear Panel
...
2.2 Basic Operation
...
2.2.1
Operating Menus and Entering Data
...
2.2.2 Light Spectrum
Measurement ...
2.2.3 Peak Power Monitor
Measurement ...
2.2.4 Alignment
...
2.2.5
Calibration
...
2.2.6 Measuring the Transmission-wavelength (or
Loss-wavelength) Characteristics
2.2.7
Light Amplifier Characteristic
Analysis ...
2.2.8
WDM Light Signal Characteristic Analysis
...
2.2.9 WDM Optical Signal Measurements Using the Monitoring
Function ...
2.2.10 Limit Line Fun ction for De vice
Evaluation ... ...
2.2.11 Setting Measurement Conditions ...
... ...
2.3 Using Expanded Functions and Inputting/Outputting Data
... ...
2.3.1
Entering Label D a ta ...
...
2.3.2
Selecting Color Patterns on the
Screen ...
2.3.3
Setting Date/Time
...
2.3.4
Saving or Reading Data
... ...
... ...
2.3.4.1 Floppy D isk ...
...
...
2.3.4.2 Backup Memory
...
...
2.3.4.3 Saving D ata ...
...
2.3.4.4 Reading D ata ... ...
...
...
2.3.5
Outputting Data (Hard Copy)
...
2.3.5.1 Internal printer
...
...
2.3.5.2 External printer ...
... ...
...
2.3.5.3 Floppy disk ...
...
...
3
R E F E R E N C E ...
...
... 3-1
3.1 Menu
Index ...
...
3.2 Menu Map ... ...
...
3.3 Functional Description ...
...
3.3.1
CENTER Key
...
3.3.2
SPAN Key ...
...
3.3.3
REF LEVEL K e y ... ...
...
...
3.3.4 LEVEL SCALE Key
...
3.3.5
RESOLUTION Key
...
3.3.6
SWEEP MODE K e y
...
3.3.7
AVG Key ... ... ...
...
...
3.3.8
AUTO K ey ...
...
... ...
3.3.9
SINGLE K ey ...
...
3.3.10 REPEAT Key
...
... ...
3.3.11 STOP K e y ...
...
... ...
3.3.12 NORMALIZE LOSS/TRANS Key
...
3.3.13 APPLICATION Key ...
...
... .
3.3.14 ADVANCE Key
...
3.3.15 ON/OFF K ey ... ...
...
...
3.3.16 λΐ K e y ...
...
...
3.3.17 λ2 K e y
...
... ...
3.3.18 LI Key
...
.
3.3.19 L2 Key
...
... 3-34
3.3.20 CONTROL K e y
...
... 3-35
3.3.21 SAVE Key
... 3-37
3.3.22 RECALL Key
...
... 3-38
3.3.23 DEVICE Key
...
... 3-39
3.3.24 COPY Key
... 3-42
3.3.25 FEED K e y
... 3-42
3.3.26 LOCAL Key
...
... 3-42
3.3.27 INSTR PRESET K e y ...
... ' ...
... 3-42
3.3.28 C A L K ey
... 3-43
3.3.29 LABEL K e y ...
... 3-44
3.4 List of
Settings ... 3-45
3.4.1 Defaults Configuration Values
...
... 3-45
4
R E M O T E C O N T R O L
...
4-1
4.1 GPIB Command Index
...
4-1
4.2 Overview of GPIB
...
4-3
4.3 Interface Functions
...
...
4-4
4.4 Program C o d e
...
4-5
4.5 Talker Formats (Data Output Formats)
...
4-6
4.6 Device Triggering Function ...
...
... 4-26
4.7 Device Clear Function
...
... 4-26
4.8 State Changes According to the Commands
...
... 4-27
4.9 Status B y
te ...
... 4-28
4.10 GPIB Command Codes
... 4-29
4.11 Example Program
s ...
... 4-41
4.11.1 Sample Programs for Setting or Reading Measurement
Conditions ... 4-41
5
T E C H N IC A L N O T E S
...
5-1
5.1 Measurement Modes
...
5.2 Averaging Functions
...
5.3 Calculating the Spectral Width and the Notch Width
...
5.3.1 Calculating the Spectral W
idth ...
5.3.1.1 PEAK THRESHOLD
...
5.3.1.2
ENVELOPE ...
5.3.1.3 RMS
...
5.3.1.4 Peak RMS
...
5.3.1.5 Xnm Level
...
5.3.2 Notch Width
...
5.3.2.1 XdB W ID TH
...
5.3.2.2 Xnm
Level ...
5.4 GAIN&NF and SNR
...
5.4.1 GAIN
...
5-1
5.4.2 NF
...
...
5-10
5.4.3 SPEDIV
...
...
5-11
5.5 Auto-Panning and Auto-Zooming Functions
... ...
5-12
5-13
5.6 Cursor Modes and Explanation for Displayed D
ata ... ...
5.7 Setting Limit L
ine ...
... ...
5-14
5.7.1
Data Files ...
...
5-14
5.7.2 Limit Line D
ata ...
...
5-14
5.8 Operation
Principle ...
5-18
5.9 Notes on Using the Optical Spectrum
Analyzer ...
5-21
5.9.1
Optical Fibers Suitable for the Optical Spectrum Analyzer
... ...
5-21
5.9.2 Stray Light
...
...
5-21
5.9.3 Secondary Diffracted Light ...
...
5-21
6
S P E C IF IC A T IO N S ...
...
6-1
A P P E N D IX ...
...
A-l
A.l
A.2
A.3
A.4
G
lossary ...
Error Messages
...
.
Other Messages ... ...
...
...
Example of a Spectrum Data File on a Floppy D isk
... A-l
A -ll
A-12
A-12
D IM E N S IO N A L O U T L IN E D R A W IN G
...
EXT-1
A L P H A B E T IC A L I N D E X ... ...
...
1-1
Typ ręczny:
Instrukcja obsługi
Strony:
240
Rozmiar:
14.96 Mbytes (15682586 Bytes)
Język:
english
Rewizja:
Ręczny ID:
FOE-8335041D00
Data:
1999 07 30
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2019 01 07
MD5:
741214eb6571f908538348dc153cf0ac
Pobrane:
560
Informacja
This manual provides the information necessary to check functionality,
operate and program the Q8384 Optical Spectrum Analyzer Operation. Be
sure to read this manual carefully in order to use the Optical Spectrum
Analyzer safely.
• Organization of this manual
This manual consists of the following chapters:
1. Introduction • Product Description • Standard Accessories and Power
Cable Options • Operating Environment • Operation Check • Setting the
Print Paper • Cleaning, Storing and Transporting Includes a
description of the Optical Spectrum Analyzer and its’ parts along with
information on its’ operating environment and how to perform a system
checkout.
2. Operation • Controls and Connectors on the Front and Rear Panels •
Screen Annotation • Basic Operation • Measurement Examples •
Expanded Functions Describes the names and the functions of each part on
the panels. You can learn the basic operation of the Optical Spectrum
Analyzer through the examples shown in this chapter.
3. Reference • Menu Index • Menu Map • Functional Description
Shows a list of operation keys, and describes the function of each key.
4. Remote Control • GPIB Gives an outline of the GPIB Interface, and how to
connect and set them up. Also included are a list of commands necessary for
programming and using the program examples.
5. Technical Notes • Technical Notes • Operation Principle • Block
Diagram Describes the principle of operation necessary for taking
measurements more accurately.
6. Specifications Shows the specifications of the Optical Spectrum Analyzer.
Appendix • Glossary Terminology related to the Optical Spectrum Analyzer is
explained in this section.