Lexmark Forms Printer 4227-100 Drukarka
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Lexmark Forms Printer 4227-100 ?
Jeśli masz jakieś inne podręczniki dla
Lexmark Forms Printer 4227-100, możesz przesłać pliki tutaj .
Model:
Forms Printer 4227-100
Data:
2000
Kategoria:
Grupa:
Opis:
Informacja
The Lexmark Form Printer 4227-100 and 4227-200 are dot matrix,
electro-mechanical printers that form characters on print media
using a printhead and fabric ribbon. The printhead is composed of
18 miniature solenoids containing print wires and operates on
electromagnetic principles. When a solenoid is energized, the small
print wire pin is “fired” toward the ribbon to make a dot on the paper.
The Printer receives commands in the form of an electronic data
stream from the PC through the parallel or serial port connector. The
Printer logic receives and translates the electronic data stream into
carrier returns, line spacing, characters, or graphics as instructed.
Typ ręczny:
Instrukcja serwisowa
Strony:
150
Rozmiar:
2.05 Mbytes (2153208 Bytes)
Język:
english
Rewizja:
Revised
Ręczny ID:
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2011 12 28
MD5:
912767de08ed8864e8de3dd757855cfe
Pobrane:
1208
Informacja
This manual describes the Lexmark Forms Printer 4227-100 and
4227-200. It contains maintenance procedures for service personnel
and is divided into the following chapters:
• General Information contains a general description of the
Printer and the maintenance approach used to repair it. Special
tools and test equipment are listed in this chapter, as well as
general environmental and safety instructions.
• Diagnostic Information contains error code table, symptom
table, and service checks used to isolate failing field replaceable
units (FRUs).
• Diagnostic Aids contains tests and checks used to locate or
repeat symptoms of Printer problems.
• Repair Information provides instructions for making Printer
adjustments and removing and installing FRUs.
• Connector Locations uses illustrations to identify the major
components and test points on the Printer.
• Preventive Maintenance contains lubrication specifications,
and maintenance information to prevent problems and maintain
optimum performance.
• Parts Catalog contains illustrations and part numbers for
individual FRUs.