Fluke PM6681R Licznik częstotliwości
Producent:
Model:
PM6681R
Data:
2003
Kategoria:
Grupa:
Opis:
Timer Counter Analyzer
Instrukcja serwisowa
Typ ręczny:
Instrukcja serwisowa
Strony:
153
Rozmiar:
9.76 Mbytes (10231010 Bytes)
Język:
english
Rewizja:
Second edition
Ręczny ID:
4822 872 20116
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2011 01 29
MD5:
65129655dc5b7ef99db1653d0bb82ce3
Pobrane:
3443
Instrukcja obsługi
Typ ręczny:
Instrukcja obsługi
Strony:
276
Rozmiar:
2.56 Mbytes (2688515 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
2000 01 01
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2018 01 20
MD5:
c8644ab9a721ad4e904f1a7cfe3ec16d
Pobrane:
2621

Informacja

Programming Manual You should use this ProgrammingManual together with thePM6680B/1/5 Operators Manual. That manual contains specificationsfor the Counter and explanations of the possibilities and limitations of the different measuring functions. Sections The chapters in this manual are di- vided into three sections aimed at dif- ferent levels of reader knowledge. The ‘General’ Section, which can be disregarded by the users who know the IEEE-488 and SCPI standards: – Chapter 2 Bus Commands for the Benchtop User gives bus com- mands for the front panel keys. – Chapter 3 Introduction to SCPI explains syntax data formats, sta- tus reporting, etc. The Practical Section of this manualcontains: – Chapter 4, Programming Exam- ples, with examples of typical pro- grams for a wide variety of appli- cations. These programs are writ- ten in GW-basic and C. This Manual The ‘Programmers Reference’ Sec- tion of this manual contains: – Chapter 5, Instrument Model ex- plains how the instrument looks from the bus. This instrument is not quite the same as the one used from the front panel. – Chapter 6 Using the Subsystems explains more about each subsys- tem. – Chapter 7, How to Measure Fast is a set of measuring situations which the user is often confronted with when programming a Counter. This chapter also contains infor- mation about how to use the more complex subsystem. – Chapter 8, Error Messages con- tains a list of all error messages that can be generated during bus control. – Chapter 9, Command Reference, This chapter gives complete infor- mation on all commands. The sub- systems and commands are sorted alphabetically.

pokaż więcej