Agilent 81133A Generator
Producent:
Model:
81133A
Data:
2002
Kategoria:
Grupa:
Opis:
Pulse Generator

Informacja

Introduction to the Agilent 81133A 81134A/Pulse Generator The Agilent 81133A and 81134A Pulse/Pattern Generators are high- end, easy-to-use tools for generating pulses, patterns and data at speeds up to 3.35 GHz. They are ideal instruments for testing logic devices (for example, ECL, LVDS, LVPECL) and other digital devices with clock rates from 15 MHz to 3.35 GHz. You can use the Pulse Generators for applications where timing and performance are critical and full control over signal jitter is required. The instruments are ideal data and pattern sources for eye diagram measurements. Benefits and Key Features Your advantages are: • Fast rise times, low jitter and full parameter flexibility When timing is critical, the 81133A.81134A’s fast rise times, the low jitter and full parameter flexibility make it an ideal pulse, clock and data source. • PRBS from 25-1 ... 231-1 You can evaluate the performance of a device in eye diagram measurements with PRBS from 25-1 ... 231-1. • Full signal manipulation You can add jitter to clock or data signals with the Delay Control Input and deform the eye with the Variable Crossover feature. • Predefined levels You can use the predefined levels to easily set up channels for commonly used logic families. These are: ECL, LVPECL, LVDS. • Data can be 8 kB of pattern memory You can create large data patterns with 8 kB of pattern memory.

pokaż więcej

Instrukcja obsługi
Typ ręczny:
Instrukcja obsługi
Strony:
92
Rozmiar:
1.21 Mbytes (1272202 Bytes)
Język:
english
Rewizja:
Ręczny ID:
5988-7401EN
Data:
2002 08 01
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2019 01 08
MD5:
1a8c3f772a22234e4deeb15e007aba35
Pobrane:
818

Informacja

Safety Requirements Safety Summary Environmental Conditions Before Applying Power Ground the Instrument Do not Operate in an Explosive Atmosphere Do not Remove the Instrument Cover Initial Inspection Power Requirements Performance Requirements Ventilation Requirements Cleaning Recommendation Declaration of Conformity Introduction to the Agilent 81133A.81134A Pulse Generator Benefits and Key Features Front Panel Overview Input and Outputs Rear Panel Overview Operating the Agilent 81133A.81134A Pulse Generator Navigation through the Pages How to Navigate through the Parameters at one Page How to Select a Parameter from a Selection List How to Change a Number Field Setting Up Generic and Advanced Signals Setting Up a Clock Signal Using the Graphical User Interface Using the Remote Programming Interfaces Setting Up a Pulse Signal Using the Graphical User Interface Using the Remote Programming Interfaces Setting Up a Data Pattern Using the Graphical User Interface Using the Remote Programming Interfaces Setting Up a Burst Signal Using the Graphical User Interface Using the Remote Programming Interfaces Setting Up a Repetitive Burst Signal Using the Graphical User Interface Using the Remote Programming Interfaces Setting Up Signals for a Stressed Eye Diagram Measurement Connecting the Instruments Setting Up the 81134A by Using the Graphical User Interface Setting Up the 33250A Waveform Generator Viewing the Eye Diagram on the 86100 DCA Play with the Settings Using the Agilent 81133A.81134A Pulse Generator Pages of the User Interface Combining Parameters for Signal Generation Instrument Modes Pattern Modes Signal Modes Variable Crossover Clock Sources Start Mode Trigger Out Timing of Generated Signals Clock Pulses Data Pattern PRBS Started Burst Repetitive Burst Jitter Modulation Saving and Recalling Settings Updating the Firmware Troubleshooting

pokaż więcej