Kikusui Electronics Corporation 418A Oscillator
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Kikusui Electronics Corporation 418A ?
Jeśli masz jakieś inne podręczniki dla
Kikusui Electronics Corporation 418A, możesz przesłać pliki tutaj .
Model:
418A
Data:
Kategoria:
Grupa:
Opis:
RC Oscillator
Informacja
The Model 41 8A RC Oscillator employs a solid-state Wien
bridge which oscillates at 10 Hz - 1 MHz in five ranges.
Being incorporated with a thermistor amplitude control
circuit, the Oscillator provides a sine wave with very minor
output voltage variation against switching of the frequency
range selector and turning of the frequency dial. Since no
output voltage readjustment accompanying frequency range
switching is required, the Oscillator is very convenient in
actual use.
The Oscillator incorporates a square wave generator circuit
( Schmitt circuit ) which provides a square waveform with a
fast rise time.
The output voltage level is adjustable for a very wide range
through combined use of a continuously variable attenuator
and a -20 dB stepwise attenuator.
Typ ręczny:
Instrukcja obsługi
Strony:
13
Rozmiar:
377.81 Kbytes (386873 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2017 09 02
MD5:
816f0023ac078e6e6ae7e607ae80b6b8
Pobrane:
415
Informacja
Instruction Manual
1. GENERAL
... 1
2. SPECIFICATIONS
... 2
3. OPERATING PROCEDURE
... 4
3.1 EXPLANATION OF PANEL CONTROLS AND SWITCHES •• 4
3.2 OPERATING PROCEDURE
... 5
3.3 CHANGE OF SUPPLY LINE VOLTAGE ... 6
3.4 PRECAUTIONS
... 6
4. OPERATING PRINCIPLE
... 7
5 • MAINTENANCE
... 9
5.1 CHASSIS INSPECTION
... 9
5.2 ADJUSTMENTS
... - ... 10