Informacji Wyposażenie:

Fluke 433 Analyzer
Producent:
Fluke
Model: 433
Data: 2007
Kategoria: Przyrządy pomiarowe
Grupa: Analyzer
Opis: Three Phase Power Quality Analyzer
Informacje:
                                    The Fluke 433, 434, 435 Three Phase Power Quality Analyzer
offers an extensive and powerful set of measurements to
check power distribution systems.

Te Podręczniki są dostępne dla powyższego urządzenia:

Instrukcja obsługi Typ: Instrukcja serwisowa Fluke-9272-Manual-Page-1-Picture
Strony: 74
Rozmiar: 1.06 Mbytes (1110428 Bytes)
Język: Angielski
Weryfikacja: 1
Manual-ID/Number: 4822 872 05396
Data: 01 maj 2007
Jakość: Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Czas trwania filmu:
MD5: d33e3648e122b794584d5ea52b5d92e2
Pliki do pobrania: 444 od 10 sierpień 2017
Informacje:
Limited Warranty & Limitation of
Liability ... 
ii
Introduction and Safety
Instructions ... 1-1
1.1 Introduction to Manual
 ... 
1-3
1.2 Safety
 ... 
1-3
1.2.1
Introduction ... 
1-3
1.2.2 Safety
Precautions ... 
1-3
1.2.3 Caution and Warning
Statements ... 
1-3
1.2.4 Symbols
 ... 
1-4
1.2.5 Impaired
Safety ... 
1-4
1.2.6 General Safety
Information ... 
1-4
Specifications ... 2-1
2.1
Introduction ... 
2-3
2.2 Electrical
Measurements ... 
2-4
2.3 Wiring
Combinations ... 
2-13
2.4
General ... 
2-13
2.5
Mechanical ... 
2-14
2.6 Power
 ... 
2-14
2.7
Standards ... 
2-14
2.8 Cross talk
 ... 
2-15
2.9 Common Mode Rejection Ratio (CMRR)
 ...  2-15
2.10 Safety
 ... 
2-15
2.11
Environmental ... 
2-15
2.12 Printers and Interface
 ... 
2-16
2.13 Electro Magnetic Compatibility (EMC)
 ...  2-16
Performance
Verification ... 3-1
3.1
Introduction ... 
3-3
3.2 Equipment Required for Verification
 ...  3-4
3.3 Relation between Characteristics and Performance Test.
 ...  3-4
3.4 General Instructions
 ... 
3-5
3.5 Operating
Instructions ... 
3-5
3.6 Display and Backlight
Test ... 
3-5
3.7. Verification of Current
Inputs ... 
3-7
3.7.1 Preparation
 ... 
3-7
3.7.2 Accuracy
 ... 
3-7
3.7.2 Bandwidth check of current channels (*)
 ...  3-8
3.8 Voltage
Inputs ... 
3-8
3.8.1
Introduction ... 
3-8
3.8.2 Verification of voltage inputs in 120 V
range ...  3-10
3.8.3 Verification of voltage inputs in 230 V
range ...  3-11
3.8.4 Verification of voltage inputs in 400 V
range ...  3-13
3.8.5 Verification of voltage inputs in 6 kV range
(Transients)  ...  3-15
3.9 Channel Isolation (*)
 ... 
3-17
Calibration
Adjustment ... 4-1
4.1
General ... 
4-3
4.1.1
Introduction ... 
4-3
4.1.2 Calibration number and
date ... 
4-3
4.1.3 General instructions
 ... 
4-4
4.1.4 Equipment required for calibration
 ...  4-4
4.2 Calibration Procedure
Steps ... 
4-4
4.3 Starting The
Calibration ... 
4-5
4.4 Contrast Calibration Adjustment
 ... 
4-7
4.5 Warming Up
 ... 
4-8
4.6 Final Calibration
 ... 
4-9
4.6.1 Offset adjustment
 ... 
4-9
4.6.2 Low voltage and current gain adjustment
 ...  4-10
4.6.3 Voltage gain adjustment
 ... 
4-10
4.7 Save Calibration Data And
Exit ... 
4-12
Disassembling the Analyzer
 ... 5-1
5.1.
Introduction ... 
5-3
5.2. Disassembly & Reassembly Procedures
 ...  5-3
5.2.1 Required
Tools ... 
5-3
5.2.2 Removing the Tilt Stand & Hang Strap
 ...  5-3
5.2.3 Replacing the Side-Strap, Changing the Side-Strap
Position  ...  5-4
5.2.4 Opening the Analyzer, Removing the Battery
 ...  5-4
5.2.5 Removing the Main PCA
Unit ... 
5-6
5.2.6 Removing the Display
Assembly ... 
5-7
5.2.7 Replacing the LCD Window/Decal
 ...  5-8
5.2.8 Removing the Keypad and Keypad Foil
 ...  5-8
5.2.9 Disassembling the Main PCA
Unit ... 
5-8
5.2.10 Reassembling the Main PCA Unit
 ...  5-9
5.2.11 Reassembling the
Analyzer ... 
5-9
List of Replaceable Parts
 ... 6-1
6.1
Introduction ... 
6-3
6.2 How to Obtain
Parts ... 
6-3
6.3 Service Centers
 ... 
6-3
6.4 Final Assembly Parts
 ... 
6-4
6.5 Main PCA Unit Parts
 ... 
6-6
6.7 Accessories
 ... 
6-7
Fluke-9272-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics