Racal SERIES 1250 Interfejs
Producent:
Brak zdjęcia!
Może możesz przesłać zdjęcie za
Racal SERIES 1250 ?
Jeśli masz jakieś inne podręczniki dla
Racal SERIES 1250, możesz przesłać pliki tutaj .
Model:
SERIES 1250
Data:
2002
Kategoria:
Grupa:
Opis:
Universal Switch Controller
Informacja
The 1250 Universal Switch Controller allows signals to be
switched in a single system from DC to 26.5GHz. The 1250
Series is a general purpose switching system designed for both
manual and automatic test systems. Low level, power, R.F. and
microwave switching requirements are addressed by the switch
modules available in the 1250 Series.
The 1250 is designed for use in automatic test systems, but
local control of the switching system is supported by Option 90,
which supplies an intelligent front panel with a display and
keyboard. Refer to Figures 1-1 and 1-2 for illustrations of the
1250 front panel and Option 90, the intelligent front panel,
respectively.
Typ ręczny:
Instrukcja obsługi
Strony:
218
Rozmiar:
1.46 Mbytes (1530254 Bytes)
Język:
english
Rewizja:
Ręczny ID:
980609
Data:
2002 03 21
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
2015 10 10
MD5:
5b098558435b0cc6175cb1ef4f3b1f54
Pobrane:
626
Informacja
This manual provides the information necessary to install and
operate the Racal-Dana Model 1250 Universal Switch Controller.
Section two (Installation) provides the procedures necessary to
unpack and inspect the 1250, install the intelligent front
panel,
install 1250 Series switch modules in the chassis and connect
the 1250 to the GPIB. Section three (Operation) provides the
command codes and keystrokes required in both local and
remote control of the 1250.