Krohn-Hite Corporation 4200 Oscillator
Producent:
Obraz 1 z 2
Obraz 2 z 2
Jeśli masz inne zdjęcia lub instrukcje obsługi dla
Krohn-Hite Corporation 4200, możesz przesłać pliki tutaj .
Model:
4200
Data:
0
Kategoria:
Grupa:
Opis:
Test Oscillator
Informacja
The Model 4200 Oscillator is a low-priced solid state laboratory or production signal source with performance available only in units selling at twice the price. It provides a sine wave over the range from 10Hz to 10MHz with 0.5 watt of power at less than 0.1% distortion. An infinite resolution dial and push-button multiplier provides rapid and continuous frequency tuning.
The half waft of power over the entire range is outstanding for a general purpose test Oscillator, and this coupled with an excellent frequency response of 0.025 db, makes the Model 4200 ideal for meter calibration, response measurements and Amplifier testing.
Amplitude calibration of 0.2db accuracy is obtained by an 8 position push-button attenuator calibrated in 10db steps. A continuous output control combined with the attenuator provides 90 db of attenuation.
The 50 ohm impedance minimizes signal losses due to resistive and capacitive loading and the half watt of power is essential for driving loads without overloading.
Unavoidable capacitive loading limits the usefulness of any Oscillator without low internal impedance and high power output capabilities.
A fixed 1 volt output independent of the main output can be used for synchronizing a scope or as an auxiliary output. For increased frequency accuracy, a synchronizing input is available to lock the Model 4200 to a precise external frequency source.
Careful attention to packaging design, rugged construction and use of all silicon transistors makes this unit insensitive to vibration and shock. The Model 4200 with its broad frequency range, flat response, clean signal and low price, is ideally suited for laboratory and production applications.
Typ ręczny:
Serwis i User Manual
Strony:
18
Rozmiar:
468.65 Kbytes (479902 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2015 09 06
MD5:
4891734ef6ba65542ef0b5d9a657e35c
Pobrane:
694
Informacja
This is a Preliminary Manual.
This manual provides operation and maintenance instructions
with detailed specifications, schematic diagram and parts
list for the Model 4200 Test Oscillator, illustrated in
Figure 1. When the suffix nRM is added to the model number
the Oscillator is provided with a front panel suitable for
standard rack mounting, and is identical to the bench model
in operation and performance.
Typ ręczny:
Serwis i User Manual
Strony:
12
Rozmiar:
10.26 Mbytes (10757468 Bytes)
Język:
english
Rewizja:
Ręczny ID:
Data:
Jakość:
Skanowany dokument, czytając częściowo źle, nie częściowo czytelny.
Data przesłania:
2021 01 17
MD5:
c9a078f4bda7b12b7cac1446806cefaf
Pobrane:
149