Philips PM 5131 Generator
Producent:
Model:
PM 5131
Data:
1988
Kategoria:
Grupa:
Opis:
Function generator 0.1Hz-2MHz

Informacja

The PM 5131 function Generator is an instrument designed for applications extending from the educational to the general purpose area. It produces sinewave, triangular and squarewave output signals, the frequencies of which are adjustable in three logarithmical sub-ranges from 0.1 Hz to 2 MHz. The frequency vernier allows the frequency setting to be varied from —20 % to +20 %. The output voltage is continuously adjustable up to 30 Vpp and can be attenuated in steps of 10 dB down to 60 dB. A continuously adjustable output voltage can be selected separately or whenever used as d.c. offset voltage added to the selected output signal. The Generator provides a more than 3 decade sweep facility with adjustable sweep range and a variable sweep time from 10 to 150 secondes. For instance it is possible to cover the audio frequency range of 20 Hz to 20 kHz in one continuous sweep. Moreover external sweep and frequency modulation can be performed. For TTL applications a separate output is available. The ergonomic design of the controls and sockets serves for convenient operating the instrument.

pokaż więcej

Serwis i User Manual
Typ ręczny:
Serwis i User Manual
Strony:
65
Rozmiar:
2.97 Mbytes (3113564 Bytes)
Język:
english
Rewizja:
Ręczny ID:
9499 453 00102
Data:
1988 04 01
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2015 05 19
MD5:
f285c2863b5e27903342ad607c0d8043
Pobrane:
1851

Informacja

1. GENERAL 5 1.1. Introduction 5 1.2. Technical data 5 1.3. Accessories 7 1.4. Operating principle 8 2. INSTALLATION INSTRUCTIONS 9 2.1. Initial inspection 9 2.2. Safety instructions 9 2.3. Mains voltage setting and fuses 10 2.4. Operating position of the instrument 10 2.5. Dismantling the instrument 10 2.6. Radio interference suppression 10 3. OPERATING INSTRUCTIONS 11 3.1. Controls and sockets 11 3.2. Operation 12 4. SERVICE PART 35 4.1. Circuit description 35 4.2. Access to parts 39 4.3. Check and adjustment 40 4.4. Safety inspection and tests after repair and maintenance 42 4.5. Spare parts 42

pokaż więcej