Electro-Voice 418 Mikrofon
Producent:
Model:
418
Data:
0
Kategoria:
Grupa:
Opis:
Microphone stand

Informacja

DESCRIPTION AND APPLICATIONS Models 418 and 419. These desk stands are styled to give a modern, pleasing appearance while supplying an appropriate base to hold the Microphone to prevent tilting and toppling over. The 418 stand is to be used with microphones having small studs, such as models 61 1, 623, 630, 636, 641, 674, 911, and 951. Models 644 and 664 produced after spring 1968 are also equipped with small studs. model 419 desk stand is to be used with microphones, such as the 665, having large studs, and large- stud-equipped models 644 and 664 produced before spring 1968. Models 418S and 419S, equipped with a long-life leaf switch, are available for use where “on-off’ switch or relay control is desired. The switch consists of two separate single-pole, single-throw switch sections controlled from a single three-position lever. Both switch sections are “open” in the center switch-lever position. The switch lever is locked in the “up” position, where one switch section is closed. The lever is non-locking in the “down” position, where the other switch section is closed. Models 418G and 419G, gold-finished, are available to match models 636G, 664G, and 674G. model 420. The 420 desk stand is specifically designed for use with Electro-Voice models 666, 655C, 654A, 676, and other microphones with a one-inch diameter. Model 420G, gold-finished, is available for use with the 676G Microphone. Model 423A, The model 423A comprises a five-inch stem riser and a sturdy, round die-cast base which rests firmly on rubber base buttons. The stand, finished in nonreflecting gray, is made for microphones with a 5/8” -27 thread connection.

pokaż więcej

Instrukcja obsługi
Typ ręczny:
Instrukcja obsługi
Strony:
2
Rozmiar:
249.56 Kbytes (255551 Bytes)
Język:
english
Rewizja:
Ręczny ID:
534539
Data:
Jakość:
Skanowany dokument, wszystko czytelne.
Data przesłania:
2014 11 23
MD5:
48b08705d653f4e52f678b8bb42e43ac
Pobrane:
1970