Informacji Wyposażenie:

Wiltron 5436A Test Set
Producent:
Wiltron
Model: 5436A
Data: 1992
Kategoria: Przyrządy pomiarowe
Grupa: Test Set
Opis: SCALAR MEASUREMENT SYSTEMS
Informacje:
                                    The 54XXA is a microprocessor controlled scalar
measurement system. This system is used to make
scalar (magnitude) transmission, reflection, and absolute
power measurements. A typical model is
shown in Figure 1-1 (facing page). All measurement
functions are selectable by using the front panel
keys and controls together with the display screen
menus. Section III describes this mode of operation.
All 54XXA front panel control functions (except
POWER on/off) are programmable via the IEEE–488
Interface bus (GPIB). This function can be ordered
as an option on all models (refer to paragraph 1-6).
Remote operation of the 54XXA using GPIB commands
is described in the GPIB User’s Guide for the
54XXA Series Scalar Measurement Systems that is
located behind the Supplements/Options tab at the
rear of this manual.
The measurement frequency range of the 54XXA is
determined by:
· The range of the internal signal source of the
particular model.
· The external SWR Autotester and/or detector
used with the 54XXA.

Te Podręczniki są dostępne dla powyższego urządzenia:

Instrukcja obsługi Typ: Instrukcja serwisowa Wiltron-6262-Manual-Page-1-Picture
Strony: 185
Rozmiar: 1.54 Mbytes (1613976 Bytes)
Język: Angielski
Weryfikacja: A
Manual-ID/Number: 10410-00123
Data: sierpień 1992
Jakość: Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Czas trwania filmu:
MD5: 65dc69cab1e4de16dab6a0ac802a92ae
Pliki do pobrania: 952 od 17 sierpień 2014
Informacje:
Chapter 1 — General Service Information
This section provides a general description of series 54XXA
Scalar Measurement Systems, system
serial numbers, and frequency ranges. It explains the level
of maintenance covered in this manual
and provides preventative maintenance procedures. It also
contains static-sensitive component handling
precautions and a list of recommended test equipment.
Chapter 2 — Replaceable Parts
This Chapter lists all replaceable subassemblies and
components for all 54XXA models. It explains
the Wiltron exchange assembly program and provides parts
ordering information.
Chapter 3 — Troubleshooting
This chapter provides information for troubleshooting 54XXA
Scalar Measurement Systems. The
troubleshooting information and fault location tables
contained in this chapter support fault isolation
down to a replaceable subassembly.
Chapter 4 — Functional Overview
This chapter provides descriptions of the functional
operation of the major assemblies contained in
54XXA series Scalar Measurement Systems. The operation of
all major circuit blocks is described
so that the reader may better understand the function of
each major assembly as part of the overall
operation of the 54XXA.
Chapter 5 — Removal and Replacement Procedures
This chapter describes how to gain access to the major 54XXA
assemblies and parts for troubleshooting
or replacement.
Chapter 6 — Adjustments
This chapter provides adjustment procedures for all models
of series 54XXA Scalar Measurement
Systems. These procedures are used after replacement or
repair of one or more critical subassemblies,
or as indicated by the Performance Verification Procedures
(which are contained in Section V
of the Series 54XXA Scalar Measurement Systems Operation
Manual).
Appendix A — RF Detector Diode Replacement Procedures
This appendix contains rf detector diode replacement
procedures for 5400-71XXX and 560-7XXX series
RF Detectors.
54XXA MM i
Appendix B — Fabrication of RF Detector Simulator
This appendix contains information for fabricating the T1492
RF Detector Simulator test aid. This
test aid is used in the calibration procedures contained in
Chapter 6.
Appendix C — Fabrication of Dummy Thermistor Test Aids
This appendix contains information for fabricating the
T38300 Dummy Down Converter Thermistor
and the T38301 Dummy Directional Coupler Thermistor test
aids. These test aids are used in
the Temperature Compensation Adjustment Procedure for series
54XXA Scalar Measurement Systems
contained in Chapter 6.
Wiltron-6262-Manual-Page-1-Picture


Instrukcja obsługi Typ: Instrukcja obsługi Wiltron-6263-Manual-Page-1-Picture
Strony: 100
Rozmiar: 1.96 Mbytes (2055909 Bytes)
Język: Angielski
Weryfikacja: E
Manual-ID/Number: 10410-00118
Data: grudzień 1994
Jakość: Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Czas trwania filmu:
MD5: fe0629c5eae863d3842f69947156ed9e
Pliki do pobrania: 834 od 17 sierpień 2014
Informacje:
Chapter 1 — General Service Information
This section provides a general description of series 54XXA
Scalar Measurement Systems, system
serial numbers, and frequency ranges. It explains the level
of maintenance covered in this manual
and provides preventative maintenance procedures. It also
contains static-sensitive component handling
precautions and a list of recommended test equipment.
Chapter 2 — Replaceable Parts
This Chapter lists all replaceable subassemblies and
components for all 54XXA models. It explains
the Wiltron exchange assembly program and provides parts
ordering information.
Chapter 3 — Troubleshooting
This chapter provides information for troubleshooting 54XXA
Scalar Measurement Systems. The
troubleshooting information and fault location tables
contained in this chapter support fault isolation
down to a replaceable subassembly.
Chapter 4 — Functional Overview
This chapter provides descriptions of the functional
operation of the major assemblies contained in
54XXA series Scalar Measurement Systems. The operation of
all major circuit blocks is described
so that the reader may better understand the function of
each major assembly as part of the overall
operation of the 54XXA.
Chapter 5 — Removal and Replacement Procedures
This chapter describes how to gain access to the major 54XXA
assemblies and parts for troubleshooting
or replacement.
Chapter 6 — Adjustments
This chapter provides adjustment procedures for all models
of series 54XXA Scalar Measurement
Systems. These procedures are used after replacement or
repair of one or more critical subassemblies,
or as indicated by the Performance Verification Procedures
(which are contained in Section V
of the Series 54XXA Scalar Measurement Systems Operation
Manual).
Appendix A — RF Detector Diode Replacement Procedures
This appendix contains rf detector diode replacement
procedures for 5400-71XXX and 560-7XXX series
RF Detectors.
54XXA MM i
Appendix B — Fabrication of RF Detector Simulator
This appendix contains information for fabricating the T1492
RF Detector Simulator test aid. This
test aid is used in the calibration procedures contained in
Chapter 6.
Appendix C — Fabrication of Dummy Thermistor Test Aids
This appendix contains information for fabricating the
T38300 Dummy Down Converter Thermistor
and the T38301 Dummy Directional Coupler Thermistor test
aids. These test aids are used in
the Temperature Compensation Adjustment Procedure for series
54XXA Scalar Measurement Systems
contained in Chapter 6.
Wiltron-6263-Manual-Page-1-Picture


Instrukcja obsługi Typ: Instrukcja obsługi Wiltron-6264-Manual-Page-1-Picture
Strony: 66
Rozmiar: 657.53 Kbytes (673313 Bytes)
Język: Angielski
Weryfikacja: C
Manual-ID/Number: 10410-00119
Data: październik 1993
Jakość: Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Czas trwania filmu:
MD5: 527cd688bd02d246bc53b3cabf308d27
Pliki do pobrania: 790 od 17 sierpień 2014
Informacje:
Chapter 1 — General Service Information
This section provides a general description of series 54XXA
Scalar Measurement Systems, system
serial numbers, and frequency ranges. It explains the level
of maintenance covered in this manual
and provides preventative maintenance procedures. It also
contains static-sensitive component handling
precautions and a list of recommended test equipment.
Chapter 2 — Replaceable Parts
This Chapter lists all replaceable subassemblies and
components for all 54XXA models. It explains
the Wiltron exchange assembly program and provides parts
ordering information.
Chapter 3 — Troubleshooting
This chapter provides information for troubleshooting 54XXA
Scalar Measurement Systems. The
troubleshooting information and fault location tables
contained in this chapter support fault isolation
down to a replaceable subassembly.
Chapter 4 — Functional Overview
This chapter provides descriptions of the functional
operation of the major assemblies contained in
54XXA series Scalar Measurement Systems. The operation of
all major circuit blocks is described
so that the reader may better understand the function of
each major assembly as part of the overall
operation of the 54XXA.
Chapter 5 — Removal and Replacement Procedures
This chapter describes how to gain access to the major 54XXA
assemblies and parts for troubleshooting
or replacement.
Chapter 6 — Adjustments
This chapter provides adjustment procedures for all models
of series 54XXA Scalar Measurement
Systems. These procedures are used after replacement or
repair of one or more critical subassemblies,
or as indicated by the Performance Verification Procedures
(which are contained in Section V
of the Series 54XXA Scalar Measurement Systems Operation
Manual).
Appendix A — RF Detector Diode Replacement Procedures
This appendix contains rf detector diode replacement
procedures for 5400-71XXX and 560-7XXX series
RF Detectors.
54XXA MM i
Appendix B — Fabrication of RF Detector Simulator
This appendix contains information for fabricating the T1492
RF Detector Simulator test aid. This
test aid is used in the calibration procedures contained in
Chapter 6.
Appendix C — Fabrication of Dummy Thermistor Test Aids
This appendix contains information for fabricating the
T38300 Dummy Down Converter Thermistor
and the T38301 Dummy Directional Coupler Thermistor test
aids. These test aids are used in
the Temperature Compensation Adjustment Procedure for series
54XXA Scalar Measurement Systems
contained in Chapter 6.
Wiltron-6264-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics