Thurlby Thandar Instruments TTI TF930 Teller
Fabrikant:
Model:
TF930
Datum:
2009
Categorie:
Groep:
Omschrijving:
3GHz UNIVERSAL COUNTER

Informatie

The TF930 is a portable, battery-operated, universal Counter with a large 0.5" 10-digit liquid crystal display (LCD). The frequency range is from below 0.001Hz to 3GHz and measurement functions include frequency, period, ratio, pulse width and count. The instrument uses a high quality temperature compensated internal frequency reference which has a low aging rate and is stable to within ±1ppm over the full temperature range. Its short warm-up time allows accurate measurements to be made even under portable battery powered conditions. Input A has configurable coupling (AC or DC), input impedance (1MΩ or 50Ω), attenuation (1:1 or 5:1), threshold (fully variable) and active edge and can be used for frequencies in the range 0.001Hz to over125MHz. Input B is a nominal 50Ω input for frequencies in the range 80MHz to 3GHz. An External Reference input is provided and changeover from the internal timebase is automatic when an external reference standard is connected. For frequency, period and frequency ratio functions the instrument uses a reciprocal counting technique to provide high resolution at all frequencies. 8 significant digits of answer are produced in a 1 second measurement time, 9 digits in 10s and 10 digits in 100s with a granularity of less than 2 counts in the least significant digit. Indicators show measurement input configuration & function, measurement time & status, external reference connection, low battery and the units of the measurement which may be Hz, kHz, MHz, ns, us, ms or s. The instrument has a USB Interface which allows it to be remotely controlled using serial communication via a computer’s USB port. The remote commands of its predecessor instrument, the TF830, are compatible with the TF930 command set. The instrument will also automatically be powered from a standard USB port when connected, whether remote control is in use or not. The instrument operates from internal rechargeable NiMH batteries which give typically 24 hours operating life. The universal AC charger supplied will recharge the batteries in less than 4 hours and can be used for continuous AC operation. Connection to a standard USB port will also power the instrument (but not charge the batteries). This instrument is fully compliant with EN61010-1 Safety and EN61326 EMC standards.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
24
Grootte:
638.22 Kbytes (653536 Bytes)
Taal:
english
Herziening:
Issue 2
Handleidingen-ID:
48581-1400
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 02
MD5:
280408e01ea1384f46742ea18c2f4560
Downloads:
1280

Informatie

Introduction 1 Specification 2 EMC 6 Safety 7 Connections 7 Manual Operation 9 Remote Operation 16 Maintenance 22

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
24
Grootte:
227.98 Kbytes (233453 Bytes)
Taal:
english
Herziening:
Issue 5
Handleidingen-ID:
48581-1400
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2013 11 03
MD5:
cef9742aade3b43794a537d2b9908940
Downloads:
683

Informatie

Introduction 1 Specification 2 EMC 6 Safety 7 Connections 7 Manual Operation 9 Remote Operation 16 Maintenance 22

toon meer