Lexmark Forms Printer 4227-200 Printer
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Lexmark Forms Printer 4227-200 ?
Als je nog andere handleidingen hebt voor de
Lexmark Forms Printer 4227-200 kun je hier de bestanden uploaden .
Model:
Forms Printer 4227-200
Datum:
2000
Categorie:
Groep:
Omschrijving:
Informatie
The Lexmark Form Printer 4227-100 and 4227-200 are dot matrix,
electro-mechanical printers that form characters on print media
using a printhead and fabric ribbon. The printhead is composed of
18 miniature solenoids containing print wires and operates on
electromagnetic principles. When a solenoid is energized, the small
print wire pin is “fired” toward the ribbon to make a dot on the paper.
The Printer receives commands in the form of an electronic data
stream from the PC through the parallel or serial port connector. The
Printer logic receives and translates the electronic data stream into
carrier returns, line spacing, characters, or graphics as instructed.
Handleidingen type:
Servicehandboek
Pagina’s:
150
Grootte:
2.05 Mbytes (2153208 Bytes)
Taal:
english
Herziening:
Revised
Handleidingen-ID:
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2011 12 28
MD5:
912767de08ed8864e8de3dd757855cfe
Downloads:
1208
Informatie
This manual describes the Lexmark Forms Printer 4227-100 and
4227-200. It contains maintenance procedures for service personnel
and is divided into the following chapters:
• General Information contains a general description of the
Printer and the maintenance approach used to repair it. Special
tools and test equipment are listed in this chapter, as well as
general environmental and safety instructions.
• Diagnostic Information contains error code table, symptom
table, and service checks used to isolate failing field replaceable
units (FRUs).
• Diagnostic Aids contains tests and checks used to locate or
repeat symptoms of Printer problems.
• Repair Information provides instructions for making Printer
adjustments and removing and installing FRUs.
• Connector Locations uses illustrations to identify the major
components and test points on the Printer.
• Preventive Maintenance contains lubrication specifications,
and maintenance information to prevent problems and maintain
optimum performance.
• Parts Catalog contains illustrations and part numbers for
individual FRUs.