Apparatuur informatie:

Tektronix TDS 520A Oscilloscoop
Model: TDS 520A
Datum: 1993
Categorie: Meetinstrumenten
Groep: Oscilloscoop
Beschrijving: Digitizing Oscilloscope
                                    The Tektronix TDS 520A, 524A, 540A, & 544A Digitizing Oscilloscopes are
portable, four channel instruments suitable for use in a variety of test and
measurement applications and systems. Key features include:

 500 MHz maximum analog bandwidth.
 1 Gigasample/second maximum digitizing rate (TDS 540A and 544A);
 500 Megasamples/second maximum digitizing rate (TDS 520A and524A).
 Four channel acquisition the TDS 540A and 544A offer four full featured channels; the TDS 520A and 524A offer two full featured channels
     and two channels with limited vertical scale selections: 100mV, 1V, and 10V.
 Extensive triggering capabilities: such as edge, logic, and glitch. Video trigger (Option 05) is also available. The video trigger modes are NTSC,
     PAL, SECAM, HDTV, and FlexFormatTM (user definable format).
 Waveform Math Invert a single waveform and add, subtract, and multiply two waveforms. On the TDS 524A, 544A, and other TDS 500A 
     equipped with option 2F, integrate or differentiate a single waveform or perform an FFT (fast fourier transform) on a waveform to display its
     magnitude or phase versus its frequency.
 Eight bit digitizers.
 Up to 15,000 point record length per channel (50,000 point with option 1M).
 Full GPIB Software programmability. Hardcopy output using GPIB, RS232, or Centronics ports (RS232 and Centronics is standard on the
  TDS 524A and 544A and optional, as option 13, on the TDS 520A and 540A).
 Complete measurement and documentation capability.
 Intuitive graphic icon operation blended with the familiarity of traditional horizontal and vertical knobs.
 Online help at the touch of a button.
 A full complement of advanced functions, like continuously updated measurements, results and local pass/fail decision making.
 A complement of advanced acquisition modes such as peak detect, high resolution, sample, envelope, and average. The FastFrameTM feature acquires waveforms in rapid succession with a minimum of dead time between acquisitions. FastFrameTM allows acquisition rates of up to 50,000 frames per second.
 A unique graphical user Interface (GUI), an onboard help mode, and a logical frontpanel layout which combine to deliver a new standard in usability.
 VGA output for driving remote monitors.
 A 1.44 Mbyte, DOS 3.3 or later, floppy disk drive for saving waveforms, color images, and Oscilloscope setups (standard on the TDS 524A and
544A and optional, as option 1F, on the TDS 520A and 540A). Also, all TDS 500A have builtin NVRAM storage for saving waveforms and setups.

User Interface
Specialized display modes, such as variable persistence (with color coding on the TDS 524A and 544A), dot or vector mode, sin(x)/x or linear display filters, and, on the TDS 524A and 544A, user selectable color palettes. The Fit to Screen feature compresses the entire waveform record to fit on the screen.
On the 524A and 544A, a color display for distinguishing among wave forms, their measurements, and associated text.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Handleidingen Type: Servicehandboek Tektronix-2503-Manual-Page-1-Picture
Pagina's: 298
Maat: 5.00 Mbytes (5244545 Bytes)
Taal: Engels
Herziening van:
Manual-ID/Number: 070–8713–03
Datum: 1993
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
MD5: 47c45ae8ae4c1ff43b113bad63fa4f6d
Downloads: 6970 Sinds 13 juni 2011

Handleidingen Type: Gebruikershandleiding Tektronix-4519-Manual-Page-1-Picture
Pagina's: 378
Maat: 2.00 Mbytes (2102273 Bytes)
Taal: Engels
Herziening van: Seventh edition
Manual-ID/Number: 070-8709-06
Datum: november 1994
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
MD5: 95d81baea023aa2e8c63a91e8335a437
Downloads: 2680 Sinds 28 april 2013
TDS Family Oscilloscope Programmer Manual

This programmer manual covers the TDS 410, 420, 460, 520A, 524A, 540A,
544A, 620A, 640A, 644A, 684A, 744A, & 784A. It also covers Advanced DSP
Math (optional on the TDS420, 460, 520A, 540A, 620A, & 640A), the
RS-232/Centronics Interface (optional on the TDS 410, 420, 460, 520A, 540A,
620A, & 640A), and the Option 05 Video Trigger. This manual provides
information on operating your Oscilloscope using the General Purpose Interface
Bus (GPIB) Interface.

Table of Contents
Getting Started
Overview of the Manual  ... 1–1
Setting Up Remote Communications  ... 1–3
Syntax and Commands
Command Syntax  ... 2–1
Command and Query Structure  ... 2–1
Clearing the TDS Family Oscilloscope  ... 2–3
Command Entry  ... 2–3
Constructed Mnemonics  ... 2–6
Argument Types  ... 2–7
Syntax Diagrams  ... 2–10
Command Groups  ... 2–11
Acquisition Commands  ... 2–11
Alias Commands  ... 2–12
Application Menu Commands  ... 2–12
Calibration and Diagnostic Commands  ... 2–13
Cursor Commands  ... 2–13
Display Commands  ... 2–14
File System Commands  ... 2–16
Hardcopy Commands  ... 2–16
Horizontal Commands  ... 2–17
Limit Test Commands  ... 2–18
Measurement Commands  ... 2–19
Miscellaneous Commands  ... 2–21
RS-232 Commands  ... 2–22
Save and Recall Commands  ... 2–22
Status and Error Commands  ... 2–23
Trigger Commands  ... 2–24
Vertical Commands  ... 2–31
Waveform Commands  ... 2–32
Zoom Commands  ... 2–37
Command Descriptions  ... 2–39
Status and Events
Registers  ... 3–1
Queues  ... 3–5
Event Handling Sequence  ... 3–6
Synchronization Methods  ... 3–7
Messages  ... 3–12
Programming Examples
Compiling the Example Programs  ... 4–2
Appendix A: Character Charts  ... A–1
Appendix B: Reserved Words  ... B–1
Appendix C: Interface Specifications  ... C–1
GPIB Function Subsets  ... C–1
Interface Messages  ... C–2
Appendix D: Factory Initialization Settings  ... D–1
Glossary and Index

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics