Apparatuur informatie:

Fluke 77 Series III Digitale multimeter
Fabrikant:
Fluke
Model: 77 Series III
Datum: 1998
Categorie: Meetinstrumenten
Groep: Digitale multimeter
Beschrijving: Multimeter
Informatie:
                                    Maximum Voltage Between any
Terminal and Earth Ground
Rated voltage
Display Digital: 3,200 counts, updates 2.5/sec
Analog: 31 segments, updates 25/sec
Response Time of Digital Display V ac < 2 s
V dc < 1 s
W < 1s to 320 kW, < 2s to 3.2 MW,
< 10 s to 32 MW
Operating Temperature 0°C to 50°C
Storage Temperature -40°C to 60°C
Temperature Coefficient 0.1 x (specified accuracy)/°C
(<18°C or >28°C)
Electromagnetic Compatibility In
RF field of 3 V/m on all functions.
Total accuracy = Specified accuracy
+ 0.1% of range.
Relative Humidity
except 32 MW range
32 MW range only
0% to 90% (0°C to 35°C)
0% to 70% (35°C to 50°C)
0% to 80% (0°C to 35°C)
0% to 70% (35°C to 50°C)
Altitude Operating: 2000 meters
Storage: 12,000 meters
Battery Type 9 V NEDA 1604 or 6F22 or 006P,
or NEDA 1604A or 6LR61
Battery Life 2000 hrs typical with alkaline
1600 hrs typical with carbon zinc
Continuity Beeper 4096 Hz
Shock, Vibration per MIL-T-PRF 28800F Class III, Sinusoidal,
Non Operating
Size (H x W x L) 3.7 cm x 8.9 - 7.8 cm x 19 cm
(1.5 in x 3.5 - 3.1 in x 7.49 in)
Weight 365 g (12.9 oz)
Safety 600 V CAT III and 1000 V CAT II per
ANSI/ISA S82.01-1994, EN 61010-1: 1993,
CSA C22.2 No 1010.1-92, UL 3111-1.
EMC Regulations EN 61326-1 1997.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Handleidingen Type: Servicehandboek Fluke-1279-Manual-Page-1-Picture
Pagina's: 59
Maat: 472.67 Kbytes (484011 Bytes)
Taal: Engels
Herziening van: 1
Manual-ID/Number: PN800604
Datum: november 1998
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: 8a459036c1e6e8d2ecd8942c766ab99c
Downloads: 1332 Sinds 15 januari 2009
Informatie:
The following descriptions briefly describe each chapter in
the manual.
Chapter 1 Introduction and Specifications
This chapter describes use of the Service Manual and
application of special
terminology (conventions) to describe the meter’s circuitry.
A complete set of
specifications appears at the end of this chapter.
Chapter 2 Theory of Operation
This chapter first categorizes instrument circuitry into
functional blocks, with
a description of each block’s role in overall operation. A
detailed circuit
description is then given for each block. These descriptions
explore operation
to the component level and fully support troubleshooting and
repair
procedures defined in Section 3.
Chapter 3 Maintenance
Provides complete maintenance information, from general
maintenance and
cleaning instructions to detailed troubleshooting and repair
procedures to the
component level. Troubleshooting and repair procedures rely
heavily on both
the Theory of Operation presented in Chapter 2 and the
Schematic Diagrams
shown in Section 5.
Chapter 4 List of Replaceable Parts
Includes parts lists for all standard assemblies.
Information on how and where
to order parts is also provided.
Chapter 5 Schematic Diagrams
Includes schematic for the A1 Main PCA.
Fluke-1279-Manual-Page-1-Picture


Handleidingen Type: Servicehandboek Fluke-131-Manual-Page-1-Picture
Pagina's: 59
Maat: 1.27 Mbytes (1328723 Bytes)
Taal: Engels
Herziening van: Rev. 1 11/99
Manual-ID/Number:
Datum: november 1998
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
MD5: d1220780f7e6c165a355e682d0ed6c86
Downloads: 877 Sinds 14 januari 2008
Informatie:
The following descriptions briefly describe each chapter in
the manual.
Chapter 1 Introduction and Specifications
This chapter describes use of the Service Manual and
application of special
terminology (conventions) to describe the meter’s circuitry.
A complete set of
specifications appears at the end of this chapter.
Chapter 2 Theory of Operation
This chapter first categorizes instrument circuitry into
functional blocks, with
a description of each block’s role in overall operation. A
detailed circuit
description is then given for each block. These descriptions
explore operation
to the component level and fully support troubleshooting and
repair
procedures defined in Section 3.
Chapter 3 Maintenance
Provides complete maintenance information, from general
maintenance and
cleaning instructions to detailed troubleshooting and repair
procedures to the
component level. Troubleshooting and repair procedures rely
heavily on both
the Theory of Operation presented in Chapter 2 and the
Schematic Diagrams
shown in Section 5.
Chapter 4 List of Replaceable Parts
Includes parts lists for all standard assemblies.
Information on how and where
to order parts is also provided.
Chapter 5 Schematic Diagrams
Includes schematic for the A1 Main PCA.
Fluke-131-Manual-Page-1-Picture


Handleidingen Type: Servicehandboek Fluke-6496-Manual-Page-1-Picture
Pagina's: 62
Maat: 1.30 Mbytes (1368124 Bytes)
Taal: Engels
Herziening van: 1
Manual-ID/Number: PN 800604
Datum: november 1999
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
MD5: 28cf63cd6a174570ecb64f62662735f5
Downloads: 204 Sinds 29 november 2014
Informatie:
The following descriptions briefly describe each chapter in
the manual.
Chapter 1 Introduction and Specifications
This chapter describes use of the Service Manual and
application of special
terminology (conventions) to describe the meter’s circuitry.
A complete set of
specifications appears at the end of this chapter.
Chapter 2 Theory of Operation
This chapter first categorizes instrument circuitry into
functional blocks, with
a description of each block’s role in overall operation. A
detailed circuit
description is then given for each block. These descriptions
explore operation
to the component level and fully support troubleshooting and
repair
procedures defined in Section 3.
Chapter 3 Maintenance
Provides complete maintenance information, from general
maintenance and
cleaning instructions to detailed troubleshooting and repair
procedures to the
component level. Troubleshooting and repair procedures rely
heavily on both
the Theory of Operation presented in Chapter 2 and the
Schematic Diagrams
shown in Section 5.
Chapter 4 List of Replaceable Parts
Includes parts lists for all standard assemblies.
Information on how and where
to order parts is also provided.
Chapter 5 Schematic Diagrams
Includes schematic for the A1 Main PCA.
Fluke-6496-Manual-Page-1-Picture


Handleidingen Type: Servicehandboek Fluke-6549-Manual-Page-1-Picture
Pagina's: 59
Maat: 1.30 Mbytes (1363832 Bytes)
Taal: Engels
Herziening van: 1
Manual-ID/Number: PN 800604
Datum: november 1999
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
MD5: 7d03391c46068325b06d2454d892304b
Downloads: 276 Sinds 30 november 2014
Informatie:
The following descriptions briefly describe each chapter in
the manual.
Chapter 1 Introduction and Specifications
This chapter describes use of the Service Manual and
application of special
terminology (conventions) to describe the meter’s circuitry.
A complete set of
specifications appears at the end of this chapter.
Chapter 2 Theory of Operation
This chapter first categorizes instrument circuitry into
functional blocks, with
a description of each block’s role in overall operation. A
detailed circuit
description is then given for each block. These descriptions
explore operation
to the component level and fully support troubleshooting and
repair
procedures defined in Section 3.
Chapter 3 Maintenance
Provides complete maintenance information, from general
maintenance and
cleaning instructions to detailed troubleshooting and repair
procedures to the
component level. Troubleshooting and repair procedures rely
heavily on both
the Theory of Operation presented in Chapter 2 and the
Schematic Diagrams
shown in Section 5.
Chapter 4 List of Replaceable Parts
Includes parts lists for all standard assemblies.
Information on how and where
to order parts is also provided.
Chapter 5 Schematic Diagrams
Includes schematic for the A1 Main PCA.
Fluke-6549-Manual-Page-1-Picture


Handleidingen Type: Servicehandboek Fluke-7659-Manual-Page-1-Picture
Pagina's: 49
Maat: 1.25 Mbytes (1314357 Bytes)
Taal: Engels
Herziening van: 1
Manual-ID/Number: 800604
Datum: november 1999
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: ccdbc4b360583f57c6d4dbbd93948c02
Downloads: 167 Sinds 28 januari 2016
Informatie:
The following descriptions briefly describe each chapter in
the manual.
Chapter 1 Introduction and Specifications
This chapter describes use of the Service Manual and
application of special
terminology (conventions) to describe the meter’s circuitry.
A complete set of
specifications appears at the end of this chapter.
Chapter 2 Theory of Operation
This chapter first categorizes instrument circuitry into
functional blocks, with
a description of each block’s role in overall operation. A
detailed circuit
description is then given for each block. These descriptions
explore operation
to the component level and fully support troubleshooting and
repair
procedures defined in Section 3.
Chapter 3 Maintenance
Provides complete maintenance information, from general
maintenance and
cleaning instructions to detailed troubleshooting and repair
procedures to the
component level. Troubleshooting and repair procedures rely
heavily on both
the Theory of Operation presented in Chapter 2 and the
Schematic Diagrams
shown in Section 5.
Chapter 4 List of Replaceable Parts
Includes parts lists for all standard assemblies.
Information on how and where
to order parts is also provided.
Chapter 5 Schematic Diagrams
Includes schematic for the A1 Main PCA.
Fluke-7659-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics