Hameg HZ65-3 Sonde
Fabrikant:
Model:
HZ65-3
Datum:
Categorie:
Groep:
Omschrijving:
Component Tester

Informatie

- Test of semiconductors - Test of discrete components - Rugged and compact In conjunction with an Oscilloscope, the component tester HZ65 can be used to test semiconductor components, resistors, capacitors and inductors not only out-of- circuit, but also often without desoldering them from circuit boards. Within certain limits, testing of integrated circuitry is also possible. Transistors can be plugged into two 3-point sockets; any combination of 2 contacts may be selected for testing. This simplifies testing of different internal transistor paths (base-emitter, emitter- collector, base-collector). Components with larger-diameter leads and ICs are connected to the 2 jacks on the side of the HZ65 using 2 test cables. The direction of current flow through the tested component or IC can be reversed. The HZ65 is particularly indi- spensable for repairs of electronic devices, providing good-bad information within seconds. This also allows quick comparison of the unit under test with a known good component or network.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
10
Grootte:
193.88 Kbytes (198534 Bytes)
Taal:
english, german
Herziening:
Handleidingen-ID:
27-0065-0310
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2018 12 22
MD5:
a44c0ece05df0319944b162f8cdedb47
Downloads:
701