Trio Electronics TR-9500 Transceiver
Fabrikant:
Afbeelding 1 van 1 uploaded by: gm4zmk Ric
Als je nog andere foto's of handleidingen hebt voor de
Trio Electronics TR-9500 kun je de bestanden hier uploaden .
Model:
TR-9500
Datum:
Categorie:
Groep:
Omschrijving:
UHF All Mode Transceiver
Informatie
FEATURES
1. 70cm all band Transceiver for FM, SSB (USB, LSB), and CW
operation.
2. Rotary click, 100Hz step digital 2-VFO system
specifically designed for mobile operation.
3. Five-digit display indicates frequency of all operating
modes.
4. TX OFFSET switch shifts frequencies - 1.6 MHz and + 1.6
MHz in the low band for standard Repeater operation.
5. Six memory channels. Two different frequencies (transmit
and receive) are stored in CH6, permitting "odd-split"
Repeater operation in FM mode.
6. Frequencies are searched quickly and automatically in SSB
and CW mode by the digital step switch.
7. With the MHz switch set to ON, the operating frequency
can be changed in MHz step by using the main dial
or the UP/DOWN switch on the microphone.
8. Incorporates auto scan circuit (BUSY signal stops in FM
mode).
9. The Transceiver has a memory scan circuit which scans
only the channels stored in the memory.
10. The Transceiver also has an MHz scan circuit which
operates with the MHz switch.
11. In the SSB/CW mode, the transmit frequency is variable
and can be used for Oscar communication.
12. Hand microphone with frequency UP-DOWN switch.
13. Automatic selection of RIT, NB, RF GAIN and AGC.
Selfcontained side tone circuit.
14. Unique escutcheon design allows easy installation for
mobile operation.
15. Full variety of accessory terminals (KEY, BACK UP, STBY,
EXT SP).
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
19
Grootte:
990.06 Kbytes (1013821 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
2018 07 13
MD5:
85a3fb1412dd75f5a18decc810b8f12e
Downloads:
467
Informatie
Instruction Manual
CONTENTS
FEATURES ...
... 3
BEFORE
USE ...
3
SPECIFICATIONS ...
4
SECTION 1. PREPARATION FOR
USE ...
5
1.1
Accessories ...
5
1.2
Installation ...
5
SECTION 2. CONTROLS AND TERMINALS
...
8
2.1 Front
panel ...
8
2.2 Rear
panel ... 10
SECTION 3. OPERATION
... 11
3.1 Mode
switch ... 11
3.2 Digital VFO ...
... 11
3.3 MHz
switch ... 11
3.4 DS
switch ... 11
3.5
Memory ... 12
3.6
Scan ... 12
3.7 TX Offset
switch ... 13
3.8
Squelch ... 13
3.9 RIT and RIT
switch ... 13
3.10 NB (Noise
blanker) ... 13
3.11 RF GAIN and S
meter ... 13
3.12 T ransmitter
precautions ... 14
3.13 CW
operation ... 14
SECTION 4. OPTIONAL
ACCESSORIES ... 16
BLOCK
DIAGRAMS ... 17
SCHEMATIC
DIAGRAMS ... 19