Apparatuur informatie:

Tektronix TG 501 Generator
Fabrikant:
Tektronix
Model: TG 501
Datum: 1978
Categorie: Meetinstrumenten
Groep: Generator
Beschrijving: Time Mark Generator plug-in
Informatie:
                                    The TG 501 is a general purpose Time Mark Generator Plug-In
designed to operate in a TM 500 Series Power Module. A
Variable Timing Readout provides a simple but accurate means
of measuring timing errors over ±7.5% minimum range. Since
many specifications are given in percentages, the error
readout eliminates the need for computations and,
additionally, lessens parallax discrepancies.
Marker selection from 5 s through 1 ns in a 1, 2, 5,
sequence is available. 5 s through 10 ns markers are
selected by a rotary switch. 5, 2, and 2 ns modified sine
waves are selected by self-canceling push-buttons when the
rotary switch is in the 521 n position.
All outputs are available at the front-panel connectors, or
by modification at the Interface connector, located at the
back of the plug-in, and the TM 500 Series Power Module.
Power supplies are current limited. The 5 V supply is
over-voltage protected to avoid damage to the integrated
circuits.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Handleidingen Type: Service-en gebruikershandleiding Tektronix-9949-Manual-Page-1-Picture
Pagina's: 97
Maat: 7.01 Mbytes (7354309 Bytes)
Taal: Engels
Herziening van: revised
Manual-ID/Number: 070-1576-02
Datum: 01 februari 1984
Kwaliteit: Gescand document alle leesbaar.
Upload datum:
MD5: c1754fce747bc5426b967a6953b9489a
Downloads: 115 Sinds 25 december 2017
Informatie:
Section 1
Specification ...  1-1

Section 2	Operating Instructions
 ...  2-1

Warning

THE FOLLOWING SERVICE INSTRUCTIONS ARE FOR USE BY QUALIFIED
PERSONNEL ONLY. TO AVOID PERSONAL INJURY, DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED IN OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

Section 3	Theory of
Operation ...  3-1

Section 4	Calibration
Procedure ...  4-1

Performance Check ...  4-1

Adjustment Procedure  ...  4-5

Section 5
Maintenance ... 5-1

Section 6
Options ... 6-1

Section 7 Replaceable Electrical Parts
 ... 7-1

Section 8 Diagrams and
Illustrations ... 8-1

Section 9 Replaceable Mechanical
Parts ... 9-1
Tektronix-9949-Manual-Page-1-Picture


Handleidingen Type: Service-en gebruikershandleiding Tektronix-9950-Manual-Page-1-Picture
Pagina's: 53
Maat: 3.71 Mbytes (3891058 Bytes)
Taal: Engels
Herziening van:
Manual-ID/Number: 070-1576-00
Datum: 01 januari 1973
Kwaliteit: Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
MD5: d20723982c0c1f84804bf8a2d3509da6
Downloads: 139 Sinds 25 december 2017
Informatie:
Instruction Manual
Tektronix-9950-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics