Advantest Corporation R6551 Digitale multimeter
Fabrikant:
Model:
R6551
Datum:
1988
Categorie:
Groep:
Omschrijving:

Informatie

R6551/R6551EMC (=this equipment) is a high-performance Digital multimeter which measures DC voltage, AC voltage (true root-mean-square (rms) value), resistance (using two-wire and four-wire conductors), DC current, and AC current (true rms value). This equipment displays measured values in up to 5 1/2 digits of 319999. In addition to the above measuring functions, this equipment has the functions of NULL operation to correct the off-set and measure relative values, and SCALE operation to display the relative ratios. It also has the external trigger function and a measurement end signal output connector. This equipment sets the integration time selected depending on the necessary measurement accuracy, and allows high-speed measurement (resulting in 4 1/4 digits) for 100 times per second. In R6551EMC, measurement with few generation of the radiation noise can be done by reinforcing the shield of the front panel and the frame. This equipment is provided with a digital Interface for programmable instrumentation called general-purpose Interface bus (GPIB) as a standard attachment. The GPIB allows this equipment to set measurement parameters, output data, and make up an automatic instrumentation system using a personal or system computer. R6551 is provided with the OPTOI for BCD parallel data output as an option. Features: - Displays measured values in up to 5 1/2 digits of 319999 with 3ppm resolution. - Allows highly sensitive measurement to be done with DC voltage resolution of 1uV and resistance resolution of 1MU. - Makes stable measurement through integral AD conversion for integration time selection and setting. - Performs high-speed sampling for 100 times per second and displays it in up to 4 1/2 digits. - Measures resistance using a four-wire measuring system not affected by the resistance of the measurement cable - Measures AC voltage and current by a true rms value measuring method. - Measures AC voltages within the wide frequency band range from 20Hz to 300kHz. - Displays output data, units, and functions with clear green LEDs. - Optimizes a measuring range at high speed using a high-speed auto-range. - Provides the NULL function to correct the off-set promptly. - Provides the SCALE function to set and calculate 100% values promptly. - Optimized to be integrated into a full-remote automatic instrumentation system using the GPIB Interface provided as a standard attachment. - Has external trigger input and measurement end signal output terminals. - Provided with BCD parallel data output as an option. /R6551 only) - Has the setting storage function to store panel setting states in the built-in non-volatile memory. - Can be calibrated by the program via the GPIB without opening the case, and has the storage for calibration data protected by the dedicated switch. - Allows high-precision measurement using the high-precision reference voltage and a thin film resistor. - Can be connected with a cable-lock type input cable (to the front panel) to prevent danger. - Uses input terminals with screw-type binding posts for sensors and general-purpose input lines on the rear panel, allowing one of the input terminals on the front and rear panels to be set selectively by the panel switch. - Even when DUT receives the effect easily from electromagnetic surroundings environments to suppress the generation of the radiation noise small in R6551EMC, steady measurement is possible.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
126
Grootte:
3.15 Mbytes (3306589 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
FOE-8311246D01
Datum:
1988 09 30
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2017 12 25
MD5:
6e0e68ca70fc4ea245cc3b768d01220e
Downloads:
758

Informatie

This instruction manual consists of the following chapters: 1 . GENERAL INFORMATION Outlines this equipment for the user who ---uses it for the first time. 2. IDENTIFICATION OF EACH PART Describes the function of each part of the panels and how to use it. 3. SAMPLE KEY OPERATIONS Chapter 3 examples simple key operations 4. STARTING OPERATION to help the user learn how to use this --1---equipment. 5. GPIB INTERFACE Explains how to fully remote control {5.9 Sample Programs) this equipment using a personal or _|--system computer. 6. BCD OUTPUT (OPTOl) Describes option 01. Option 01 is /R6551 only) effective on R6551 only. 7. SPECIFICATION, OPTIONS, AND Accessories 8. CHECKING AND CALIBRATION Helps the user to troubleshoot with this ... equipment and make calibration. 9. DESCRIPTION OF R6551 / Summarizes the operation of this R6551EMC OPERATION equipment.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
212
Grootte:
6.15 Mbytes (6452860 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
FOE-8311246D01
Datum:
1988 09 30
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2019 01 07
MD5:
dceadcfb977a9d9903fd30047a324bb3
Downloads:
551

Informatie

toon meer