Orban 105B Effect Processor
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Orban 105B ?
Als je nog andere handleidingen hebt voor de
Orban 105B kun je hier de bestanden uploaden .
Model:
105B
Datum:
Categorie:
Groep:
Omschrijving:
Reverberation
Informatie
The Orban/Parasound Reverberation system represents a
significant advance in increasing the performance/cost ratio
of artificial reverberation generators. New concepts in
driving electronics for the Hammond spring delay line have
resulted in the solution of problems typical to even the
highest priced units using this delay system.
The O/P Reverb is available in four models to meet a variety
of customer requirements.
MODEL 105A comes mounted behind a 1.5 x 9" panel, and is
designed to be mounted in mixing consoles using standard
modular strips. It has no internal Power Supply, and
requires + 15 volts of well-filtered DC at approximately 100 ma.
MODEL 105B is identical to model 105A except that an
internal Power Supply is provided, and the unit is powered
by the 110/220 volt AC line.
MODEL 105C is a 1 3/4" rack mounted version of the system.
It is self-powered from 110/220 volts AC. There is a
provision for the addition of a remote hard limiting
indicator lamp which can be mounted so that it can be easily
seen by the Mixer.
MODEL 105D consists of two model 105C's, mounted on a single
1 3/4" rack panel.
The economy of the O/P reverberation system makes multiple
echo channels economically feasible for many smaller
studios. The 105D provides maximum space economy.
All versions are supplied with a plug-in 4-spring delay line
assembly, which is mounted separately from the electronics.
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
8
Grootte:
1.05 Mbytes (1100156 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
2017 10 23
MD5:
c085a680a0af2ead5f7842f5dd90457f
Downloads:
1785