Quadtech Inc. Sentry 30 Plus Analyzer
Fabrikant:
Afbeelding 1 van 1
Als je nog andere foto's of handleidingen hebt voor de
Quadtech Inc. Sentry 30 Plus kun je de bestanden hier uploaden .
Model:
Sentry 30 Plus
Datum:
2005
Categorie:
Groep:
Omschrijving:
Hipot Tester
Informatie
The Sentry Plus Series is available in three models, the 10,
20 and 30, all of which provide AC
Hipot testing capability. Additionally, the Sentry 20 & 30
Plus instruments provide DC Hipot
testing. The Sentry 30 Plus unit provides Insulation
Resistance testing. The hipot test can be
programmed over a voltage range of 0.05 to 5kV AC and 0.05
to 6kV DC with a min/max
leakage current detection range of 0.001 to 20mA AC and
0.0001 to 5mA DC. Insulation
resistance measurements are possible to 50GΩ at programmable
DC test voltages between 50
and 1000V. Each instrument comes standard with programmable
ground continuity, internal
storage containing 60 memory locations (10 steps each) and a
remote Interface with start/stop
inputs & pass/fail outputs.
UL Requirements
The Sentry Plus Series instruments meet the requirements
outlined by UL for Hipot Testers. The
Sentry Plus indicates the test potential (test voltage), has
both visual and audible indication of
failure and the STOP switch must be manually pressed prior
to another measurement being
made. The Sentry Plus Series instrument has a 100VA output
[(5000V * 20mA) = 100VA]. The
Sentry Plus Series instrument also measures and displays the
output voltage directly at the output
terminals during the test.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
85
Grootte:
360.01 Kbytes (368649 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
150697/A4
Datum:
2005 01 01
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
2017 01 29
MD5:
528365f705357bffc44ad0435fbd65d6
Downloads:
2679
Informatie
Warranty
... 5
Specifications
... 7
Accessories
... 11
Safety
Precautions ... 13
Condensed Operating Instructions
... 15
Introduction - Section 1
1.1 Unpacking and
Inspection ... 21
1.2 Product Overview
... 21
1.3 Controls and Indicators
... 22
1.3.1 Front Panel Controls and Indicators
... 22
1.3.2 Rear Panel Controls and Connectors
... 23
1.4 Installation
... 24
1.4.1 Dimensions
... 24
1.4.2 Instrument
Positioning ... 24
1.4.3 Power Requirements
... 24
1.4.4 Safety
Inspection ... 25
Operation - Section 2
2.1 Terms and Conventions
... 27
2.2
Start-Up ... 31
2.3 Programming Electrical Safety
Tests ... 31
2.4 Programming a Ground Continuity Test
... 35
2.5 Programming an AC Hipot Test
... 37
2.6 Programming a DC Hipot Test
... 39
2.7 Programming an Insulation Resistance (IR) Test
... 41
2.8 Programming a Pause (PA) in Test Sequence
... 43
2.9 Storing a Test Setup
... 45
2.10 Programming a Multi-Step
Test ... 47
2.11 PRESET Test Parameters
... 48
2.11.1 AC-V FREQ
... 48
2.11.2 Software AGC
... 48
2.11.3 WV AUTO RANGE
... 48
2.11.4 IR AUTO RANGE
... 49
2.11.5 GFI
... 49
2.11.6 FAIL RESTART
... 49
2.12 Instrument Offset
... 50
2.13 Connection To Device Under Test
... 53
2.14 Measurement
Procedure ... 54
2.15 MENU Parameters
... 56
2.15.1 MEMORY Function
... 57
2.15.2 SYSTEM Function
... 59
2.15.2.1 CONTRAST
... 59
2.15.2.2 BUZZER VOLUME
... 59
2.15.2.3 EN 50191
... 59
2.15.2.4 DC 50V AGC
... 60
2.15.3 OPTION Function
... 60
2.15.4 CALIBRATION Function
... 60
2.15.5 KEY LOCK Function
... 61
2.15.6 CHANGE PASSWORD Function
... 63
2.15.7 ERROR LOG Function
... 65
2.15.8 ABOUT Function
... 65
Interface - Section 3
3.1 Remote
... 67
3.2 G16 International Power Strip
... 70
3.3 S07 Power Entry Adapter Cable
... 71
3.4 S03 Corded Product Adapter
... 72
3.5 S05 Foot Switch
... 73
3.6 S08 Gun Probe
... 74
3.7 S50 Plus Ground Bond Tester
... 75
Service & Calibration - Section 4
4.1
General ... 77
4.2 Instrument Return
... 77
4.3
Calibration ... 77
4.3.1 Calibration
Parameters ... 78
4.3.2 Enable Calibration
... 79
4.3.3 AC Voltage Calibration
... 80
4.3.4 DC Voltage Calibration
... 80
4.3.5 IR Voltage
Calibration ... 81
4.3.6 AC Current
Calibration ... 82
4.3.7 DC Current
Calibration ... 83
4.3.8 ARC Calibration
... 84
4.3.9 IR Resistor Calibration
... 84
4.3.10 Ground Continuity Calibration
... 85
4.3.11 Contrast Calibration
... 85
4.3.12 Finalize Calibration
... 85