Fluke 80E Voltage Source
Fabrikant:
Afbeelding 1 van 3
Afbeelding 2 van 3
Afbeelding 3 van 3
Als je nog andere foto's of handleidingen hebt voor de
Fluke 80E kun je de bestanden hier uploaden .
Model:
80E
Datum:
1981
Categorie:
Groep:
Omschrijving:
Voltage Divider
Informatie
The model 80E Voltage Dividers extend the measuring range of
Fluke differential voltmeters. The Model 80E-10 has a
maximum input voltage of 10KV. The Model 80E-5 has a maximum
input voltage of 5KV. Other input voltages are available on
request. Both 10V and IV output terminals are provided,
which permit use of the 80E with Fluke differential
voltmeters, or a null- type potentiometer.
1-3. A center zero panel meter permits observation of the
approximate magnitude and polarity of the unknown voltage.
In order to ensure maximum accuracy and long life, properly
aged, wirewound resistors, having a very low temperature
coefficient, are used throughout the instrument. The case of
the instrument is suitable for either bench use or rack
mounting.
1-4. This instrument has been thoroughly checked and tested
before being shipped from the factory. Immediately after
receiving the instrument, carefully inspect for any damage
which may have occurred during transit. If any damage is
noted, refer to the instructions outlined in the back of
this manual.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
31
Grootte:
1.89 Mbytes (1986486 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
293860
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2016 01 29
MD5:
dbd47e3a5e116ad1456c8d60c078cb0b
Downloads:
645
Informatie
I INTRODUCTION AND SPECIFICATIONS 1-1
1-1.
Introduction ...
1-1
1-5.
Specifications ...
1-1
1-6,
Electrical ...
1-1
1-7.
Mechanical ...
II OPERATING INSTRUCTIONS 2-1
2-1. Operating Procedure
... 2-1
III THEORY OF OPERATION 3-1
3-1. Theory of
Operation ... 3-1
IV MAINTENANCE 4-1
4-1.
Introduction ...
4-1
4-2.
Troubleshooting ...
4-1
4-5. Calibration of
8ÖE-10 ... . 4-1
4-7. Calibration of
80E-5 ... 4-2
V LIST OF REPLACEABLE PARTS 5-1
5-1.
Introduction ...
5-1
5-2. How to Obtain
Parts ... 5-1
5-3. Use Code
Effectivity ... 5-5