Palomar Engineers R-X NOISE BRIDGE Ander
Fabrikant:
Afbeelding 1 van 2
Afbeelding 2 van 2
Als je nog andere foto's of handleidingen hebt voor de
Palomar Engineers R-X NOISE BRIDGE kun je de bestanden hier uploaden .
Model:
R-X NOISE BRIDGE
Datum:
0
Categorie:
Groep:
Omschrijving:
Noise Bridge
Informatie
General Description. The R-X NOISE BRIDGE contains a
wideband noise Generator and an r-f impedance bridge. Two
arms of the bridge are driven equally by the noise Generator
through a broadband ferrite transformer. A third leg of the
bridge has a calibrated variable resistor R and a calibrated
variable capacitor C in series. The antenna or other
"Unknown" circuit to be measured is connected
as the fourth leg of the bridge. A short-wave receiver is
used as the detector.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
15
Grootte:
407.29 Kbytes (417061 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2015 12 26
MD5:
9906293095f2d81c0beb64edafd85dc8
Downloads:
973