Kepco ATE 75-1.5M Voeding
Fabrikant:
Model:
ATE 75-1.5M
Datum:
1976
Categorie:
Groep:
Omschrijving:

Informatie

The Kepco ATE with programmable overvoltage protector is a precision stabilized Power supply which can deliver either stabilized output voltage or current. The prevailing operating mode is indicated by LED mode indicators at the front panel. Operating mode crossover is automatic and may be monitored remotely by means of a flag signal, available at the rear programming connector. The Power supply features "full range" output control by means of 10-turn, high resolution front panel potentiometers. A pair of front panel meters constantly monitor the output voltage and output current. This Power supply has a linear and fully dissipative NPN pass transistor section driven by high-gain, integrated circuit amplifiers. The output of the power supply is fully programmable, All necessary input terminals are provided on a programming connector at the rear of the chassis. Terminals are also provided for remote error sensing, as well as for the connection of the output capacitor directly at the load. 1-5 The ATE Power supply features user-selectable "slow" or "fast" operating modes. Slow mode operation is recommended for applications demanding a constant Voltage Source. Fast mode operation is best if the output voltage must change rapidly, either in response to an external programming signal or, if the ATE is used as a current stabilizer, as a reaction to changing load resistance.

toon meer

Servicehandboek
Handleidingen type:
Servicehandboek
Pagina’s:
52
Grootte:
2.57 Mbytes (2698980 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2015 08 14
MD5:
9ac36a223896f21f49ff98c077a82955
Downloads:
756

Informatie

This manual contains instructions for the installation, operation and maintenance of the "ATE" series of voltage and current stabilized d-c power supplies.

toon meer