Leader 408NPS TV patroon generator
Fabrikant:
Geen foto beschikbaar!
Misschien kan je een foto uploaden voor de
Leader 408NPS ?
Als je nog andere handleidingen hebt voor de
Leader 408NPS kun je hier de bestanden uploaden .
Model:
408NPS
Datum:
0
Categorie:
Groep:
Omschrijving:
NTSC/PAL/SECAM PATTERN GENERATOR
Informatie
The 408NPS corresponds to NTSC, PAL, and SECAM systems. The
video sweep Generator and multiburst signal functions are
used to check the frequency characteristics of video
equipment, in addition, all-channel RF output allows the
Generator to adjust and check TV and VTR sets having TV-band
tuners. The GENLOCK and black burst functions make the
universal pattern Generator a synchronizing signal source
for various types of video equipments.
The RF output using Synthesizer technique can be set the
frequency directly from the front panel or internal data
according to country name, band (VHF, UHF, and CATV) or channel.
1.2 FEATURES
• Conforms to NTSC, PAL, and SECAM systems.
• Provision of VHF, UHF, and CATV channels
• Enables GENLOCK function {Sync only for the SECAM).
• Sound signals, 1kHz and 400Hz, available,
• Provision of Video sweep (100kHz to 15MHz, 2 bands
selectable).
• RF signal using Synthesizer technique.
• RF modulation capability for EXT VIDEO.
• RGB output connector (rectangular, 8-pin, TTL level)
provided as standard.
• 21-pin multiconnector provided as standard.
• Y/C separation connectors (S and BNC) provided as standard.
• Up to 100 addresses can be programmed (selectable address
range).
• Remote control function permits address controls.
• The GPIB Interface provided as an option.
Handleidingen type:
Gebruikershandleiding
Pagina’s:
86
Grootte:
2.41 Mbytes (2523270 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2015 06 09
MD5:
d0caedcc52610b327b59c6f00a1cbf5f
Downloads:
860
Informatie
1. GENERAL
INFORMATIONS ... 1-1
1.1
INTRODUCTION ... 1-1
1.2
FEATURES ... 1-1
1.3
SPECIFICATIONS ... 1-1
1.3.1 Color
Systems ... 1-1
1.3.2
Patterns ... 1-1
1.3.3 Sync
Signal ... 1-3
1.3.4 Mode
Control ... 1-3
1.3.5 Amplitude
Preset ... 1-3
1.3.6 Front Panel
Output ... 1-4
1.3.7 Rear Panel
Output ... 1-4
1.3.8 Rear Panel
Input ... 1-7
1.3.9
Presetting., ... 1-7
1.3.10
Others ... 1-7
2.
PRECAUTIONS ...
2*1
3. PANEL
DESCRIPTIONS ...
3-1
3.1 Front
Panel ...
3-1
3.2 Rear
Panel ...
3-2
4. OPERATING
INSTRUCTIONS ...
4-1
4.1 Power
Supply ...
4-1
4.2 Pattern Selection
...
4-2
4.3 Turning Sync and Burst Signal
On/Off ... 4-7
4.4 Level Settings for Luminance, Chroma, Burst, and Sync
Signal ... 4-8
4.5 Video Signal
Output ... 4-9
4.6 Sync
Signal ... 4-12
4.7 RF
Output ... 4-13
4.8 Sound Signal
Output ... 4-15
4.9
GENLOCK ... 4-16
4.10 Remote Control
... 4-17
4.11 Function Keys and Setting
Items ... 4-18
4.12 Menu Structure
... 4-21
4.13 Setting Method of Each Item in the
Menu ... 4-23
5. TEST
PATTERNS ...
5-1
5.1 Color Bar
Patterns ...
5-1
5.2 Raster
Pattern ...
5-6
5.3 Multiburst and Sweep
Patterns ... 5-7
5.4 DEM
Pattern ...
5-9
5.5 5 STEP, 10 STEP, and APL
Patterns ... 5-10
5.6 Checker
Pattern ... 5-11
5.7 Window Pattern
... 5-12
5.8 Convergence and Alignment Patterns
... 5-14
5.9 Circle
Pattern ...
5-15
5.10 Moving
Marker ...
5-15
5.11 Applications of the
Patterns ...
5-16