Wavetek 39 Generator
Fabrikant:
Model:
39
Datum:
1997
Categorie:
Groep:
Omschrijving:
30 MS/s Universal Waveform Generator

Informatie

This Synthesized Programmable Arbitrary Waveform Generator uses a combination of direct digital synthesis and phase lock loop techniques to provide high performance and extensive facilities in a compact instrument. It can generate a wide variety of waveforms between 0-1 mHz and 15MHzwith high resolution and accuracy. Arbitrary waveforms may be defined with 12 bit vertical resolution and from 4 to 65536 horizontal points. In addition a number of standard waveforms are available including sine, square, triangle, ramp and pulse. Arbitrary waveforms may be replayed at a user specified waveform frequency or period, or the sample rate may be defined in terms of period or frequency. Extensive waveform editing features between defined start and end points are incorporated, including waveform insert, point edit, line draw, amplitude adjust and invert. The Model 39 is also supported by Wavetek’s WaveForm DSP2 arbitrary waveform creation Software, which can download waveforms via the RS232 or GPIB interfaces. Up to 50 waveforms may be stored with the length and name specified by the user. Waveforms may be strung together to form a sequence of up to four steps. Each waveform may have a user defined repeat count from 1 to 32768. All waveforms can be swept over their full frequency range at a rate variable between 30 milliseconds and 15 minutes. Sweep can be linear or logarithmic, single or continuous. Single sweeps can be triggered from the front panel, the trigger input, or the digital interfaces. A sweep marker is provided. Amplitude Modulation is available for all waveforms and is controlled from an external Generator via the Ext VCA input. All waveforms are available as a Triggered Burst whereby each active edge of the trigger signal will produce one burst of the carrier. The number of cycles in the burst can be set between 1 and 1048575. The Gated mode turns the output signal On when the gating signal is true and Off when it is false. Both Triggered and Gated modes can be operated from the internal Trigger Generator (0.005Hz to 50kHz), from an external source (dc to 1MHz) or by a key press or remote command. The signals from the REF IN/OUT socket and the SYNC OUT socket can be used to phase lock two or more generators. This can be used to generate multi-phase waveforms or locked waveforms of different frequencies. The Generator parameters are clearly displayed on a backlit LCD with 4 rows of 20 characters. Soft-keys and sub menus are used to guide the user through even the most complex functions. All parameters can be entered directly from the numeric keypad. Alternatively most parameters can be incremented or decremented using the rotary control. This system combines quick and easy numeric data entry with quasi-analog adjustment when required. The Generator has, as standard, both RS-232 and GPIB interfaces which can be used for remote control of all of the instrument functions or for the down-loading of arbitrary waveforms; the GPIB Interface conforms to IEEE-488.2.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
90
Grootte:
22.97 Mbytes (24088455 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
850317-1
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
2014 11 18
MD5:
af65bf83cff8723a6aba121463eeb9ea
Downloads:
969

Informatie

Introduction 3 Specifications 4 Safety 10 EMC 11 Installation 11 Connections 13 Front Panel Connections 13 Rear Panel Connections 14 General 16 Initial Operation 16 Principles of Operation 18 Standard Waveform Operation 20 Setting Generator Parameters 20 Warnings and Error Messages 23 SYNC Output 24 Sweep Operation 25 General 25 Setting Sweep Parameters 26 Triggered Burst and Gate 29 General 29 Triggered Burst 30 Gated Mode 31 Sync Out in Triggered Burst and Gated Mode 31 Tone Mode 32 Other Modulation Modes 34 External VCA 34 External SUM In 34 Arbitrary Waveform Generation 36 Introduction 36 Creating New Waveforms 37 Modifying Arbitrary Waveforms 38 Arbitrary Waveform Sequence 43 Frequency and Amplitude Control with Arbitrary Waveforms 44 Sync Out Settings with Arbitrary Waveforms 45 Waveform Hold in Arbitrary Mode 46 Output Filter Setting 46 Pulse and Pulse-trains 47 Pulse Set-up 47 Pulse-train Setup 48 Waveform Hold in Pulse and Pulse-Train Modes 50 Synchronizing Generators 51 System Operations from the Utility Menu 53 Calibration 56 Remote Operation 58 Address and Baud Rate Selection 58 Remote/Local Operation 58 RS232 Interface 58 GPIB Interface 61 Power on Settings 63 Status Reporting 64 RS232 Remote Command Formats 66 GPIB Remote Command Formats 68 Remote Commands 68 Frequency and Period 68 Amplitude and DC Offset 68 Waveform Selection and Definition 69 Waveform Sequence Control 70 Arbitrary Waveform Editing 71 Mode Commands 72 Input/Output control 72 Status Commands 73 Miscellaneous Commands 74 Remote Command Summary 75 Appendix 1. Warning and Error Messages 79 Appendix 2. SYNC OUT Automatic Settings 82 Appendix 3. Factory System Defaults 83

toon meer